Important Installation Considerations - BandLuxe E600 Series User Manual

Installation

Important Installation Considerations

The LTE Advanced Outdoor CPE should be pole-mounted outdoors and
aligned so its antenna faces the nearest LTE eNB. Before installing the
outdoor CPE, consider the appropriate location, clearance, and device
orientation.
Location and Cable wiring
1. Consult your Service Provider to find the best location and angle for getting the
strongest signal from the base station.
2. Do a walking test around the house to find the best spot with the strongest signal
if you don't obtain related information from Service Provider.
3. Mount the CPE at the highest possible location with a clear view of the base
station signal source. Buildings or other obstructions will affect the quality of the
signal you receive.
4. Keep the best distance as possible from other devices that may cause
interference.
5. Keep the LTE Advanced Outdoor CPE away from power lines.
6. Avoid placing LTE Advanced Outdoor CPE too close to any metallic reflective
surfaces.
7. Disconnect the power cord first before mounting the CPE. Otherwise this may
result in personal injury due to electric shock.
8. Be sure to ground LTE Advanced Outdoor CPE with an appropriate grounding
wire (not included) by attaching it to the grounding screw on the unit and to a
good ground connection.
8