Silvercrest SND 3600 A2 Operating Instructions Manual page 73

Handling and operation
Scanning with the ArcSoft MediaImpression 2 programme
♦ Connect the device. The LED PWR
♦ Start the ArcSoft MediaImpression 2 programme.
♦ Click on the button "Capture".
When the programme is fi rst started after the installation a cali-
bration and data collection process takes place. Make sure that
no slide or negative holders are inserted into the device.
♦ In the displayed information window click on the button "OK"
to start calibration and data collection. The fi rst calibration and
data collection process can take several minutes.
The calibration progress will be displayed.
After completion of the calibration the programme window will
be displayed.
SND 3600 A2
lights up.
GB
69