Related Manuals for Metso Valvcon LCU Series
Summary of Contents for Metso Valvcon LCU Series
- Page 1 VALVCON LCU-SERIES OPTION “S2” ADDITIONAL LIMIT SWITCHES Installation, Maintenance and Operating Instructions...
- Page 2 These instructions provide information about safe handling and operation of the actuator. If you require additional assistance, please contact the manufacturer or manufacturer's representative. Addresses and phone numbers are printed on the back cover. See also www.metso.com/valvcon for the latest documentation. SAVE THESE INSTRUCTIONS! Subject to change without notice.
- Page 3 IMO-I1478 GENERAL INSTALLATION Description CAUTION: The LCU-Series Limit Switch Kit adds two additional limit Dangerous voltages are present inside the actuator cover unless switches to an actuator. Standard actuators are shipped the power supply to the actuator has been shut off or disconnect- from the factory with two limit switches installed—one to ed.
- Page 4 Figure 3 LCU-Series DC Wiring Subject to change without prior notice. Metso Automation Inc. Europe, Vanha Porvoontie 229, P.O. Box 304, FI-01301 Vantaa, Finland, Tel. +358 20 483 150, fax +358 20 483 151 North America, 44 Bowditch Drive, P.O.Box 8044, Shrewsbury, Massachusetts, 01545-8044 USA. Tel. int. +1 508 595 5083. Fax int. +1 508 595 5183...