Table of Contents
Advertisement
Installation, Operation and Maintenance Manual
XXXXXXXX Rev. 1
7.4
Removal of Worm Wheel
•
•
Figure 12
7.5
Reassembly of AT Series Gearbox
•
•
•
Disassembly and Reassembly
Remove the worm wheel by lifting it from the gearbox housing.
Replace and lubricate the 'O' rings in the housing before reassembling the worm
wheel.
Removing the Worm Wheel
In reassembly of the AT Series gearbox, follow all above steps in reverse order.
Be sure to lubricate all mating / rotating parts with grease
Ensure to provide a liquid sealant on both covers and housing
Section 7: Disassembly and Reassembly
July 2016
14
Advertisement
Table of Contents
