Balcrank Director Jr. 3110-031 Operation, Installation, Maintenance And Repair Manual page 9

SETUP INFORMATION
General
Director JR. 3110-031, VDC comes preprogrammed with pulse settings from the factory (see Table 1 below).
Units shipped from the factory come pre-set for quarts.
When the system is powered on, the display will indicate:
- the current system settings with a delay of 2 seconds (see image 2 below)
- the total ammount dispensed with a delay of 2 seconds
- normal operation display (see image 1 below)
Image 1 - Normal operation display
Image 2 - Current System Settings; Units and Pulses Per Unit
The first Digit indicates the current unit setting (see table below), and the last 4 digits indicate the
pulses per unit. For the image above the unit is set to quarts and 310 pulses.
Table 1: Units and Factory pre-set pulses
First Digit Unit of Measure
0.
G
P
L
8
Pulses Per Unit
(after 6/2016)
Quarts
Gallons
Pints
Liters
Pulses Per Unit
(before 6/2016)
310 155
1242 621
156 78
328 164