Table of Contents
Advertisement
CROSSLINC
REMOTE
Read this entire installation section before you start
installation.
Safety Precautions
Do not attempt to use this equipment until you have
thoroughly read all installation, operating and maintenance
information supplied with your equipment. They include
important safety precautions and detailed operating and
WARNING
maintenance instructions.
ELECTRIC SHOCK can kill.
•
Turn the input power OFF at the disconnect switch or
fuse box before attempting to connect or disconnect
input power lines, output cables or
control cables.
•
Only qualified personnel should perform
this installation.
•
Do not touch metal portions of the
CrossLinc Remote work clip when the welding power
source is on.
•
Do not attach the work clip to the remote.
•
Connect the work clip directly to the work, as close as
possible to the welding arc.
•
Turn power off at the welding power source before
disconnecting the work clip from the work.
•
Only use on power sources with open circuit voltages
less than 90 VDC.
select suitable location
Do not submerge the CrossLinc Remote.
The CrossLinc Remote is suitable for outdoor use.
hiGh FreQuency Protection
Locate the CrossLinc Remote away from radio controlled
machinery. The normal operation of the CrossLinc Remote may
adversely affect the operation of RF controlled equipment, which
may result in bodily injury or damage to the equipment.
5
INSTALLATION
Advertisement
Table of Contents
