Lincoln Electric CrossLinc K4345-1 Operator's Manual page 7

CROSSLINC REMOTE
General Physical DescriPtion
The CrossLinc Remote is a portable unit which is connected at the
welding arc and allows the user to remotely control the welding
output without the use of control cables. The remote is small and
lightweight. It has LC-40HD style connections to the welding
cables for easy connection and disconnection. The CrossLinc
remote also has rubber corner caps and the controls themselves
are protected for extra durability. When the remote is connected
to any CrossLinc compatible power source
adjusted in constant current or constant voltage modes.
General Functional DescriPtion
To use the CrossLinc Remote, connect the LC-40HD connectors to
the electrode cable and connect the work clip to the workpiece.
Once connected, the remote will power up immediately and
automatically pair with the power source. Once the remote is
paired, the power source preset can be adjusted with no
additional control cable. The display on the front of the remote
will show the preset value of current or voltage when not welding.
The remote will show actual voltage or current while welding, and
hold the last known current or voltage for 10 seconds after
welding is finished so that the user can verify his process settings.
recoMMenDeD Processes
• GTAW
• SMAW
• GMAW (with an across-the-arc wire feeder)
• FCAW-G (with an across-the-arc wire feeder)
• FCAW-S (with an across-the-arc wire feeder)
Process liMitations
Not compatible with high frequency GTAW
eQuiPMent liMitations
• The CrossLinc Remote can only be used with CrossLinc
compatible power sources
• CrossLinc can not change preset while welding
recoMMenDeD PoWer sources
• Flextec 350X
• Flextec 650X
(1) The CrossLinc Remote is not compatible with Flextec 350 Power Sources
with code numbers below 12600.
DesiGn Features
• CrossLinc Technology
(1)
, the output can be
• Digital display with 4 digits shows workpoint
• Encoder for full range workpoint adjustment
• LC-40HD connectors standard for easy setup
• Digital meters show actual voltage or current during welding
3
- Allows for the adjustment of preset without cumbersome
control cables
- Allows the welder to get the right settings every time
without having to return to the power source
- No more control cables to carry, repair or trip over
DESCRIPTION