Configuring A Network Profile - Nikon Coolpix S610C Connection Manual

Q7115_Wireless_EN_1st
Q7115_Wireless_EN.book Page 16 Tuesday, June 3, 2008 7:34 PM
Configuring the Camera's Wireless Settings
4
Start the Utility.
Follow the instructions below to start the Utility:
Windows: Start the computer and select Start>All
Programs>my Picturetown Utility> my
Picturetown Utility.
Macintosh: Start the computer and open Applications>Nikon
Software>my Picturetown Utility folder, and
double-click the my Picturetown Utility icon.
When the Utility finishes loading, the screen shown at right will be
displayed. Take note of suggestions given and click Next.
You can also start the Utility by clicking the my Picturetown
Utility icon ( ) on the desktop (Windows) or the my Picturetown Utility icon (
Dock (Macintosh).
B
Connecting the USB Cable
When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use
force when connecting the USB cable. When disconnecting the USB cable, do not pull the
connector at an angle.
Connection may not be recognized when the camera is connected to a computer via a USB hub.
5
The Select Action dialog is displayed.
1 Add Network Profiles
2 Edit/Delete Network Profiles
3 Change password
4 Reset camera
5 Edit address book
6 Register to my Picturetown
1 Configure wireless LAN settings information with the camera (A 17).
2 Edit or delete network profiles stored in the camera (A 19).
3 Apply, edit or delete the camera's password (A 23).
4 Reset all wireless settings stored in the camera (A 24).
5 Enter Picture Mail recipient aliases and e-mail addresses, or create groups of Picture Mail
recipients (A 22).
6 Enter the information required for my Picturetown registration and send the information to
my Picturetown (A 20). Connection to the Internet is required.
B
Six-Month Complimentary T-Mobile HotSpot Subscription (the United States only)
If using the six-month complimentary T-Mobile HotSpot subscription and connecting via a public
wireless LAN, choose Register to my Picturetown, click Next, and proceed to "n Entering my
Picturetown User Information" (A 20) to set up the camera's wireless settings. Do not choose Add
Network Profiles or Edit/Delete Network Profiles to modify a network profile of tmobile.
16
Q7115_Wireless_EN.book Page 17 Tuesday, June 3, 2008 7:34 PM
m
Enable connection of the camera to the Internet via a wireless LAN access point. Use the
Utility to apply the same network settings used by the wireless LAN network to the camera.
Up to ten network profiles to connect can be registered.
Accessing the wireless LAN network from the computer before configuring a network
profile is recommended.
If using the six-month complimentary T-Mobile HotSpot subscription, a network profile
has already been configured with the camera. Be sure to proceed to "n Entering my
Picturetown User Information" (A 20) (in the United States only).
) in the
1
Choose Add Network Profiles from the Select
Action dialog (A 16) and click Next.
Click Cancel to cancel configuration.
2
Choose the type of network profile and click Next.
If configuring a home wireless LAN profile, choose Add Network
Profile at Home Wireless LAN. If configuring a public wireless LAN
profile, choose Add Network Profile at Public Wireless LAN.
See "Public Wireless LAN" (A iv) for more information on countries
in which public wireless LANs can be accessed by, and the wireless
service providers that support connection of, this camera.
Windows:
If Add Network Profile at Home Wireless LAN is selected,
proceed to step 3.
If Add Network Profile at Public Wireless LAN is selected,
proceed to step 4.
Macintosh:
Proceed to step 4.
3
Choose a setup option and click Next.
If Automatic setup (recommended) is selected
for one or more access points detected by the computer will be
displayed in the Network name (SSID) (A 9)
desired SSID and enter the encryption key in the Encryption key
(A 9) field. Click Next to apply the setting. The network profile is
stored in the camera. Proceed to step 7.
If connection by any wireless device is not allowed by the access
point, or the desired SSID is not detected, select Manual setup
(for advanced users) to specify the IP address manually, or to
configure wireless settings using a computer that is not
connected to the Internet, and click Next. Proceed to step 4.
Configuring the Camera's Wireless Settings

Configuring a Network Profile

and the SSIDs
field, select the
17