Sanyo PNR-XS2432 Installation Instructions Manual page 14

(b) INSTALLING THE AIR-INTAKE CHAMBER
Set the air-intake chamber to the indoor unit taking
care not to set to the incorrect direction. (Fig. 3-17)
Fasten the air-intake camber with the accessory
screws. (M5 L125, 4pcs) (Fig. 3-17)
(c) INSTALLING THE DUCT CONNECTION BOX
Fasten the duct connection flange to the duct
connection box with the accessory screws (M4
L12, 4 pcs.). (Fig. 3-18)
Put the duct connction box into the rectangular hole
of the air-intake chamber and fasten it to the both
sides of the indoor unit and chamber with the
accessory screws (M4
(d) INSTALLING THE INDOOR UNIT
Install the indoor unit to the ceiling.
(Install the indoor unit according to items 3-1 to 3-6.)
(e) INSTALLING THE CEILING PANEL
Attach the ceiling panel to the chamber.
Remove the socket cover of the air-intake chamber
and pass the 3P and 6P sockets through it. (Fig. 3-17)
Connect the 3P socket to the 3P plug of the indoor
unit electrical component box.
Connect the 6P socket to the 6P plug from the
operation selector.
Reattach the socket cover.
(f) INSTALLING THE HIGH-PERFORMANCE FILTER
OR SUPER LONG-LIFE FILTER (Fig. 3-18)
Turn the filter hooks of the air-intake chamber.
Install high-performance or super long-life filter into
the chamber. (Install in the correct direction. Set the
filter so that the arrow on the side as shown in the
drawing on the right can be installed into
air-intake chamber.
Turn the filter hook (positioned so the filter frame is
aligned) and secure the air filter in place.
Take adequate precautions
when installing onto the
CAUTION
ceiling. The air-intake cham-
ber is especially prone to
rupture if struck on it's side.
L12, 4 pcs.). (Fig. 3-18)
the
Installation screws
Air-intake chamber
3P socket
(from ceiling panel)
3P plug
(electrical
component box)
Indoor unit
Air filter
Arrow
Ceiling panel
14
S4359128
Socket cover
(6P socket)
Fig. 3-17
Installation screws Installation screws
(M4 12) (M4
Duct
connection box
Duct
connection
flange
Rectangular
hole
Filter hook
1113_X_S
Fig. 3-18
Operation
selector
6P plug
1115_X_S
12)