Advertisement
SYNC YOUR CAMERA WITH
THE BASE STATION
When adding additional E1 cameras to your system, you will need to
individually sync them to the Base Station.
1. Please insert the Rechargeable Battery into the camera.
2. Place the camera within 1 to 3 feet (30 to 100 centimeters) of
the Base Station.
Within 1 to 3 feet
3. Press and hold the Sync button on the top of the Base Station for
about two seconds and then release it.
USB . LAN . Sync . Power
Sync Status LED
4. When Sync Status LED blinks green, press the Sync button on
top of the camera for about two seconds, and then release it.
A green LED on the camera will blink rapidly while syncing. The
camera LED will then turn off, and the Sync Status LED of the Base
Station will turn solid green, indicating that sync is successful and
the camera is ready for viewing!
Note: If the camera LED blinks an Amber color, then sync has failed.
Please repeat the sync process again and ensure that the camera is
within 1-3 ft. of the Base Station.
Syncing more than one camera?
Repeat steps 1 through 4 for each camera.
Advertisement
