Table of Contents
Advertisement
Lens position setup and focus adjustment (continued)
z When using one of PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ870 / PT-RZ770 / PT-RW730 /
PT-RZ660 / PT-RW620 / PT-DZ780 / PT-DW750 / PT-DX820
When moving the lens position to the lens standard position, perform the operation with the following procedure.
LENS
SHIFT
VERTICAL POSITION
HORIZONTAL POSITION
ADJUST
HOME POSITION
DEFAULT
LENS
HOME POSITION
CHANGE
EXECUTE
ENTER
10-ENGLISH
NORMAL
CANCEL
MENU
1) Turn on the projector to start the
projection.
2) Press the <SHIFT> button on the
remote control.
z The shift adjustment screen appears.
3) Press the <DEFAULT> button on
the remote control while the shift
adjustment screen is displayed.
z The [HOME POSITION] screen appears.
4) Use the ◄► buttons to select
[ET-DLE030].
z Each press of the ◄► buttons switches the
item to [NORMAL] or [ET-DLE030].
5) Press the <ENTER> button.
z [PROGRESS] is displayed on the [HOME
POSITION] screen and the lens position
moves to the lens standard position for
ET-DLE035.
Advertisement
Table of Contents
