Function Of Remote Controller - LG LS-J0760FL Product Data Book

12.Function of Remote Controller

Type 1 (Wireless LCD)
The remote control transmits the signals to the system.
5
6
4
2
7
ON OFF
11
8
13
15
Operation Mode
Cooling Operation
Auto Operation or Auto Changeover
Healthy Dehumidification Operation
Heating Operation
• Cooling Model( ), Heat Pump Model(
84 2005 Product Data
Signal transmitter
1
3
10
CANCEL
9
SET
12
AUTO CLEAN
17
14
16
Flip-up door
(opened)
)
START/STOP BUTTON
1
Operation starts when this button is pressed and stops
when the button is pressed again.
Operation mode selection button
2
Used to select the operation mode.
ROOM TEMPERATURE SETTING BUTTONS
3
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR
4
Used to select fan speed in four steps
low, medium, high and CHAOS.
JET COOL
5
Used to start or stop the speed
cooling. (Speed cooling operates
super high fan speed in cooling mode.)
CHAOS SWING BUTTON
6
Used to stop or start louver movement and set the desired
up/down airflow direction.
ON/OFF TIMER BUTTONS
7
Used to set the time of starting and stopping operation.
TIME SETTING BUTTONS
Used to adjust the time.
8
TIMER SET/CANCEL BUTTON
Used to set the timer when the desired time is obtained and
9
to cancel the Timer operation.
SLEEP MODE AUTO BUTTON
10
Used to set Sleep Mode Auto operation.
AIR CIRCULATION BUTTON
11
Used to circulate the room air without cooling or heating.
ROOM TEMPERATURE CHECKING BUTTON
12
Used to check the room temperature.
PLASMA(OPTIONAL)
13
Used to start or stop the plasma-purification function.
HORIZONTAL AIRFLOW DIRECTION CONTROL
14
BUTTON (NOT ON ALL MODELS)
Used to set the desired horizontal airflow direction.
RESET BUTTON
15
Used prior to resetting time or after replacing batteries.
2nd F Button
16
Used prior to using modes printed in blue at the bottom of
buttons.
AUTO CLEAN(OPTIONAL)
17
Used to set Auto Clean mode.