Table of Contents
Advertisement
•
Press the button again twice for speed 3
, TIP: When changing brush heads, test each head on different speeds to
identify which is most comfortable for you.
7
Gently glide the brush over the skin in circular motions avoiding the
delicate eye area. Fig. 4 When you feel a pause, move to the next area.
, NOTE: Try to avoid applying too much pressure with
the brush when directly on the skin. If this happens
the brush will automatically stop its cycle and switch
off. This is perfectly normal and helps to ensure a
comfortable treatment. The cleansing brush can be
restarted by pressing the On switch.
•
If you wish to end the cleansing cycle early press the
On/ Off button as per below:
•
When using speed 1, press On/Off button 3 times
•
When using speed 2, press On/Off button twice
•
When using speed 3, press On/Off button once
•
When not in use, store the brush attachments with the
protective caps on. Fig. 5
•
Ensure the bristles are dry before attaching the
protective cap.
C REPLACING THE BRUSH HEADS
, Removing the brush head:
•
Hold the brush handle with one hand.
•
With the other hand, gently pull the brush head upwards until it comes off.
Fig. 6
•
To replace the brush head, gently push the head back on until you hear a
click. Fig. 7
Fig. 4
Fig. 5
7
Advertisement
Table of Contents
