Table of Contents
Advertisement
Quick Links
OPERATOR MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
This manual provides information for:
DOMESTIC MODELS:
DEE-4T - 40/60(C,A) TA/3
DHT - 40/60(C,A) TA/3
D - 40/60/80 TA/3
·
Electric, Gas or Steam Heated
·
Floor Mounted
·
Tilting Kettle
·
Tilt Out Agitator Drive System
·
Variable Speed Agitator Controls
·
Twin Agitator
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE.
READ, UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND
WARNINGS CONTAINED IN THIS MANUAL.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
WARNING
Improper installation, adjustment, alteration, service
or maintenance can cause property damage, injury or
death. Read the installation, operating and maintenance
instructions thoroughly before installing or servicing this
equipment.
NOTIFY CARRIER OF DAMAGE AT ONCE
It is the responsibility of the consignee to inspect the container upon receipt of
same and to determine the possibility of any damage, including concealed dam-
age. Unified Brands suggests that if you are suspicious of damage to make a
notation on the delivery receipt. It will be the responsibility of the consignee to file
a claim with the carrier. We recommend that you do so at once.
Manufacture Service/Questions 888-994-7636.
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
PART NUMBER 176748, REV. A (08/18)
1055 Mendell Davis Drive
Jackson, MS 39272
888-994-7636, fax 888-864-7636
unifiedbrands.net
Advertisement
Table of Contents
Related Manuals for Groen DEE-4T - 40/60(C,A) TA/3
Summary of Contents for Groen DEE-4T - 40/60(C,A) TA/3
- Page 1 OPERATOR MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: DOMESTIC MODELS: DEE-4T - 40/60(C,A) TA/3 DHT - 40/60(C,A) TA/3 D - 40/60/80 TA/3 · Electric, Gas or Steam Heated · Floor Mounted · Tilting Kettle · Tilt Out Agitator Drive System ·...
-
Page 2: Important Operator Warnings
IMPORTANT - READ FIRST - IMPORTANT CAUTION: BE SURE ALL OPERATORS READ, UNDERSTAND AND FOLLOW THE OPERATING INSTRUCTIONS, CAUTIONS, AND SAFETY INSTRUCTIONS CONTAINED IN THIS MANUAL. WARNING: THIS UNIT IS INTENDED FOR USE IN THE COMMERCIAL HEATING, COOKING AND HOLDING OF WATER AND FOOD PRODUCTS, PER THE INSTRUCTIONS CONTAINED IN THIS MANUAL. - Page 3 ELECTRICITY, IMPROPER INSTALLATION CAN RESULT IN INJURY TO PERSONNEL AND/OR DAMAGE TO EQUIPMENT. WARNING: ANY MECHANICAL OR ELECTRICAL CHANGE MUST BE APPROVED BY THE GROEN FOOD SERVICE ENGINEERING DEPARTMENT. WARNING: TURN OFF AGITATOR BEFORE ADDING INGREDIENTS OR INSPECTING KETTLE CONTENTS. DO NOT WEAR LOOSE CLOTHING OR JEWELRY AROUND OPERATING MIXER KETTLE.
-
Page 4: Table Of Contents
Table of Contents Important Operator Warnings ............page 2-3 References..................page 4 Equipment Description..............page 5 Installation .................. page 5-6 Operation ..................page 7 Cleaning ..................page 8 Maintenance................. page 9 Troubleshooting................page 10 Parts Lists ................page 11-16 Wiring Diagram ................page 17 Service Log .................. -
Page 5: Equipment Description
Installation WARNING Your Groen mixer has been test operated at the factory and is furnished with all TURN OFF POWER AT THE CIRCUIT internal wiring. It is complete and ready for final connection. A wiring diagram is BREAKER PRIOR TO INSTALLATION. -
Page 6: Installation
If the unit functions as described above, it is ready for use. If the unit does not function Slip-on Coupling as intended, call your local Groen authorized service agency. For instructions on initial start-up of the kettle component of your cooker/mixer, see the separate kettle manual. -
Page 7: Operation
Operation WARNING 1. Before you operate the mixer, make sure that the agitator is firmly connected TURN OFF AGITATOR BEFORE ADDING with the drive shaft and properly positioned in the kettle. The agitator must be INGREDIENTS OR INSPECTING KETTLE positioned so every scraper blade touches the kettle during at least part of each CONTENTS. -
Page 8: Cleaning
Cleaning WARNING A. SUGGESTED TOOLS & MATERIALS BEFORE CLEANING ANY PART OF THE MIXER, 1. A good stainless steel cleaner. OTHER THAN THE AGITATOR, SHUT OFF ALL ELECTRIC POWER TO THE COOKER/MIXER AT 2. Stiff brush. THE CIRCUIT BREAKER OR FUSE BOX, TO AVOID 3. -
Page 9: Maintenance
USE OF ANY REPLACEMENT PARTS 1. The interior of control and drive housings should be kept clean and dry. OTHER THAN THOSE SUPPLIED BY GROEN 2. Electrical wiring should be kept securely connected and in good condition. OR THEIR AUTHORIZED DISTRIBUTOR VOIDS ALL WARRANTIES AND CAN CAUSE 3. -
Page 10: Troubleshooting
Unified Brands web site at unifiedbrands.net, ask your area Groen representative or call the Groen Parts and Service Department. If an item on the list is followed by X, the work should only be performed by a qualified service representative. -
Page 11: Parts Lists
Parts List Twin-Agitator Components QUANTITY Description Part # FINGER, SCRAPER 006502 14 16 18 PIN, CIRCULAR, COTTER 111957 AGITATOR, PRIMARY, 009243 40 GAL AGITATOR, SECONDARY, 009686 40 GAL AGITATOR, PRIMARY, 009244 60 GAL AGITATOR, SECONDARY, 009687 60 GAL AGITATOR, PRIMARY, 009245 80 GAL AGITATOR, SECONDARY,... - Page 12 Parts List Transfer Case Assembly – Front Housing QUANTITY Description Part # FRONT HOUSING, TRANSFER 009263 CASE FRONT HOUSING, TRANSFER 009250 CASE GEAR, PINION (24 TEETH) 009268 GEAR, PINION (28 TEETH) 009254 GEAR, PINION (32 TEETH) 009255 MOUNTING PLATE, 135118 GEARMOTOR PIN, COUPLING, 3/8"...
- Page 13 Parts List Transfer Case Assembly – Rear Housing (For DHT & DEE/4 Kettles) QUANTITY Description Part # REAR HOUSING, TRANSFER CASE 009295 SCREW, MACHINE, HEX HEAD, 1/2- 005623 13 X 1-1/4" LONG SCREW, MACHINE, HEX HEAD, 1/2- 005728 13 X 2-1/4" LONG SCREW, MACHINE, HEX HEAD, 1/2- 005734 13 X 1-3/4"...
- Page 14 Parts List Transfer Case Assembly – Rear Housing (For DL Kettles) QUANTITY Description Part # REAR HOUSING, TRANSFER 009295 CASE SCREW, MACHINE, HEX HEAD, 1/2-13 X 1-1/4" 005623 LONG SCREW, MACHINE, HEX HEAD, 1/2-13 X 2-1/4" 005728 LONG SCREW, MACHINE, HEX HEAD, 1/2-13 X 1-3/4"...
- Page 15 Parts List Equipment Box Description Part # CONTACTOR, 12A, 4-POLE 111072 BLOCK, FUSE, 2-POLE 096809 FUSE, 20A, CLASS CC 071489 INVERTER, 2HP, 200/240V 120436 INVERTER 2 HP, 380/460V 128975 LUG, GROUND, 14-16 AWG 119829 SOCKET, RELAY 115359 RELAY, CONTROL 115358 BLOCK, TERMINAL, 3-POLE 003888 TRANSFORMER, 100VA...
-
Page 16: Parts Lists
Parts List Equipment Box Description Part # ASSY, ELECTRICAL CONTROL, 128458 OPERATOR (COMPLETE) SWITCH, START-STOP, 128485 AGITATOR SWITCH, SPEED, AGITATOR 115341 SWITCH, EMERGENCY STOP 115342 LEGEND PLATE, START - 128477 STOP LEGEND PLATE, BLANK 128478 LEGEND PLATE, EMERGENCY 128479 STOP BRACKET, CONTROL, HORIZ. -
Page 17: Wiring Diagram
Wiring Diagram OM-TA/3... -
Page 18: Service Log
Service Log Model No: Purchased From: Serial No: Location: Date Purchased: Date Installed: Purchase Order No: For Service Call: Date Maintenance Performed Performed By OM-TA/3... - Page 20 1055 Mendell Davis Drive • Jackson MS 39272 888-994-7636 • 601-372-3903 • Fax 888-864-7636 unifiedbrands.net PART NUMBER 176748, REV. A (08/18) © 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.