Table of Contents
Advertisement
Search for a location
The search will be carried out around a certain
reference point. Always look at the current reference
point shown in the blue field above the POI category
buttons and confirm that it matches what you want.
To change the reference, tap the "Change ref." button
in the top right corner.
Once you tap the "Change ref." button, you are
presented with these choices.
Address :
You can specify an address to be searched, or a
settlement to search in. The centre of this settlement
will be used as the reference point.
History :
The reference for the search can be selected from the
History list.
Coodinates :
You can specify a latitude/longitude pair to be the
centre of the search.
Current GPS :
The search will be carried out around the current
location given by the GPS if it is available. If no GPS
position is available, the last known GPS position will
be used.
Cursor :
The search will be carried out arround the previously
selected map point.
Destination :
The search will be carried out arround the destination
of your current route.
Once you have set the reference point, you have the
following potions on the "Find POI" screen.
43
Advertisement
Table of Contents
