Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
Edgemere
2-piece Toilet
®
Elongated and Round Front
Models 204AA, 204BA Series
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read
these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
!
NOTE: Pictures may not exactly define contour of china and components.
TANK 4519A and 4519B
BOWL 3519A ELONGATED / BOWL 3519B ROUND FRONT
Wax Ring
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
EZ-INSTALL KIT INCLUDED WITH TANK
Tank To Bowl Gasket
EZ-INSTALL KIT INCLUDED WITH BOWL
T-Bolts with
Retainer (2)
SOLD SEPARATELY
Water Supply Line
2 Plastic Washers
Attachment Handle
with 2 Nuts
Bowl-To-Floor
Bolt Caps (2)
Knobs (2)
Slow Close Toilet Seat
7 3 0 2 4 0 6 - 10 0
Advertisement
Related Manuals for American Standard Edgemere 204AA Series
Summary of Contents for American Standard Edgemere 204AA Series
- Page 1 Models 204AA, 204BA Series Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
-
Page 2: Back-To-Back Installation
Before You Start: If Removing An Existing Toilet Flush to remove Turn Off Water Supply Clean Flange water from tank; sponge remaining water from bowl before removing toilet. Caution: If leaving floor flange open for more than 1-2 hours, cover flange to prevent escaping sewer gases. - Page 3 Install tank bolts in bottom of tank as shown. Tighten handles alternately until the tank contacts the front and back of the bowl achieving china-to-china contact. Tank to Bowl Gasket Place the tank gasket over NOTE: To ease installation, the tank nut ensuring there push down on the top of the are no gaps between the tank while tightening handles.
- Page 4 DUAL FLUSH PUSH BUTTON ADJUSTMENTS WATER LEVEL ADJUSTMENT KNOB a. Adjust water level. Water level should be adjusted to level indicated on tank by adjusting REFILL TUBE float cup using water level adjustment knob. b. Flush Valve Setting Adjustments: FLUSH VALVE Flush Valve Without...
-
Page 5: Troubleshooting Guide
WARNING: Do not use in-tank cleaners. These products can seriously corrode fittings in the tank. This damage can cause leakage and property damage. American Standard shall not be responsible or liable for any damage caused by the use of in-tank cleaners.