Viewing The Fc Port Information; Configuring An Fc Storage Port - SANRAD V-Switch User Manual

Example
Storage port 3, pscsi3, is assigned SCSI bus ID 12.
pscsi set busid –if pscsi3 –id 12

Viewing the FC Port Information

Use the CLI command fc interface show to view all FC ports on the V-
Switch; their World Wide Port Names (WWPN) and administrative and
operative types.
fc interface show
Alias
fc1
fc2

Configuring an FC Storage Port

The V-Switch default configuration for FC connections is 1 GB nl port in a
public loop. If you want to change the default configuration, each storage
port connected to an FC device can be reconfigured to change the
connection speed, port type and connection mode. Use the CLI command
fc set to change the FC storage port communication speed; the port type
or connection mode.
fc set
You need to define four parameters to reconfigure an FC port:
58
S P
WITCH ARAMETER
-if
INTERFACE
-id IDENTITY
WWPN
20:00:00:20:38:11:34:78
20:00:00:20:38:00:10:64
S P
WITCH ARAMETER
-if
INTERFACE
-sp
SPEED
-pt
PORT TYPE
D S
EFINITION TATUS
STORAGE PORT MANDATORY
NUMBER
SCSI
BUS OPTIONAL
IDENTITY
DEFAULT
Connect
Mode
Provate
Private
D S
EFINITION TATUS
STORAGE PORT MANDATORY
FC
OPTIONAL
: 0
COMMUNICATION AUTO
1 GB: 1
SPEED
2 GB: 2
FC
TYPE OF PORT OPTIONAL
N OR NL
E
XAMPLE
pscsi3
12
: 7
Oper Speed
Type
NlPort 1Gbs
nlPort 1Gbs
E
XAMPLE
fc2
1
nl
SANRAD V-Switch User Manual