Removing All Volumes In A Hierarchy - SANRAD V-Switch User Manual

Removing all Volumes in a Hierarchy

If you are working in
a V-Switch cluster,
the volume must be
removed on both V-
Switches.
volume remove -all
You need to define one parameter to remove all volumes within a volume
hierarchy:
Example:
The top-level volume Stripe 1 is removed along with its component
volumes, Simple 2, 4, 8 & 10.
volume remove -all –vol Stripe1
164
You can remove a volume and all of its component volumes in a volume
hierarchy. The volume must be at the top of the hierarchy. The volume
cannot be exposed; the volume LUN must be inactivated. Simple
volumes will convert back to subdisks.
S P
WITCH ARAMETER
-all
ALL
-vol
VOLUME ALIAS
D S
EFINITION TATUS
ALL VOLUMES IN MANDATORY
HIERARCHY
-
ALIAS OF TOP MANDATORY
LEVEL VOLUME TO
REMOVE
E
XAMPLE
No parameter
required
Stripe1
SANRAD V-Switch User Manual