Introduction - Edax Element User Manual

1

INTRODUCTION

Removing any of the instrument
covers, may pose a safety hazard as high
voltages may be exposed.
All User / Operator adjustments and calibrations are done within the Element software environment.
Users of the system should not attempt removing any covers or making any service adjustments.
Proceed with caution where the following label is found.
Do not attempt to use until fully
understanding its proper connections and
functions. Users should have a basic
understanding of the operation of the
system before operating.
The detector is a sophisticated precision instrument.
Removal of any system's covers must be done by
qualified EDAX Factory trained engineers or
representatives.
Please send feedback regarding this manual to:
edax.support@ametek.com
Element Basic User Guide
Page 5 of 21
Introduction