Download  Print this page
   

Advertisement

SH-S203B(TS-H653B)EN/RU
2007.8.13
2:12 PM
Page 1
DVD Writer
SH-S203B(TS-H653B)
/SH-S203D(TS-H653D)
User Guide - ENGLISH
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be deter-mined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Change or modifications not expressly approved by the manufacturer responsible for
compliance could void the user 's authority to operate the equipment.
LASER STANDARD
IEC 60825-1 :1993 +A1 :1997 +A2 :2001
WEEE
Correct Disposal of This Product (Waste Electrical &Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This mark shown on the product or its literature,indicates that it should not be disposed with
other household wastes at the end of its working life.To prevent possible harm to the
environment or human health from a uncontrolled waste disposal,please separate this from
other
types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product,or their
local government office,for details of where and how they can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract.This product should not be mixed with other commercial wastes for disposal.
Samsung Eco-mark
The Samsung's own Eco mark helps consumers to easily understand that
Samsung develops eco-friendly products. This mark represents Samsung's
continuous effort to develop eco-friendly products.
• RoHS
(Restriction of the use of certain hazardous substances in electrical and electronic equipment)
The RoHS, the environmental regulation announced by European Union, restricts the
use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in products put
on the market in The European Union after July 1, 2006.
BG68-01412A REV.02
- http://www.samsung-ODD.com
- http://www.samsung.com
When using one S-ATA cable
Drive
MainBoard
Hard Drive
When you have one ODD and the other ODD products.
Master Drive
Slave Drive
MainBoard
Hard Drive
5
All manuals and user guides at all-guides.com
Safety Precautions
The following are basic precautions to ensure user safety
and reduce the risk of property damage.
When you install the drive
Place the drive on a level
surface.
Do not place the drive in
Failure to do so may cause the
direct sunlight.
device to fall onto a hard surface,
resulting in damage or malfunction.
While operating
Handle with caution to prevent
Do not drop the drive, and pro-
damage from an external shock.
tect it fromsevere shocks.
It can damage the drive or cause
it to malfunction.
Other
Never allow food particles or
To protect against the risk of
foreign substances to enter the
fire, do ot spill such liquids as
drive casing.
alcohol and benzene on the
drive.
• Any change or modification not expressly approved by designated qualified personnel could
void your authority to operate this device.
1
Installing the Drive
System Requirements
S-ATA supported PC
(The compatible motherboard list can be found from the website)
256Mbytes or above
Installing the DVD Writer
How to install the DVD Writer on your PC. First, remove the cover; con-
nect the cable to the DVD Writer and then to the PC.
1
If necessary, attach a horizontal bracket
to both sides of the drive.
• You can purchase these accessories separately
from your computer dealer.
(Screws for use: M3 X 6 X 4)
2
Remove the plate from a free expansion slot and install the
DVD Writer , as shown in the illustration.
• If you have no free expansion slot, install the drive in place of the
diskette drive.
• Make sure to use the standardized screws supplied (M3X6).
- To use screws other than M3X6 may result in malfunction.
DVD
Plate
Writer
Horizontal
Bracket
6
Warning/Caution
Warning:
To warn the user that failure to comply with the instructions may result in
serious injury or death.
Caution:
To caution the user that failure to comply with the instructions may result in
damage to property.
Avoid low- or high-temperature
Avoid high-humidity environments.
environments.
Do not move the drive while in operation and
Do not use cracked, distorted or
do not attempt to open the disc tray byforce.
damaged discs.
Make sure to close all working programs before
attempting to open the tray and always use the
open/close button.
Do not insert a pin into the emergency open-
In particular, a disc with a crack on the
inner tracks may break while in use.
ing while in operation.
1. Check to see that the disc does not have a crack before use.
Do not disassemble, attempt to repair or
If the disc has a crack (especially around the center hole),
modify the device without an express
it is recommended that you make a copy immediately and
approval as directed in the manual.
use the copy instead.
When a cracked disc is used continuously,the size of the
To reduce the risk of damage,
crack is likely to grow and it will eventually result in irreparable
electric shock, and fire.
damage to the disc.
2. Do not use low quality discs (i.e., illegal products, scratched or
damaged discs).
Important to read and understand
Do not disassemble
at all times
2
Using the Drive/Storing and Cleaning
Your Discs
Using the DVD Writer
1
Push the power button and boot the computer.
2
After booting the computer, open the disc
com-
partment by pressing the Eject button.
3
Insert the disc (CD) with the label on the disc
facing upwards and close the disc compartment
by pressing the Eject button. The indicator light
comes on.
4
Play the disc (CD).
Playing CD-DA/Audio CDs
Run the CD player program supplied with the sound card or play the
Windows Media Player.
Playing Video CDs
Follow the instructions provided with the disc.
• A video card or MPEG software and a sound card need to be installed to view video CDs.
• If the drive is vertically installed, you cannot use an 8 cm Mini Disc
because the disc is movable.
Storing Your Discs
Do not place a disc in direct sunlight.
Store a disc vertically in a well-ventilated and
stable location.
Do not write or attach a label on a disc.
Do not drop a disc or place heavy objects on it.
Cleaning Your Discs
Do not touch the surface
To clean a disc, polish lightly
of a disc; hold it by the
from the inside of the disc to the
edges.
outside with a soft cotton cloth.
The disc may not function properly if there are fingerprints, foreign substances or
dust on the disc surface.
7
Introduction
Design and specifications are subject to change without prior notice.
Disc compartment
Eject Button
Front
Emergency eject hole
LED
If the compartment does not open
when you press the Eject button,
power off the computer, insert a pin
or unfolded paper clip in the hole
and push firmlhy)
S-ATA Power cable
S-ATA Data cable
Rear
Accessories
User Guide, Screw 4ea
The type of accessories varies depending on a product model.
and some accessories described herein are subject to change without notice.
3
Solving Technical Problems
The friction noise generated during SPIN-UP and STOP is caused by the
Automatic Ball Balancing System(ABS) and is not a malfunction.
The tray won't open.
See if the PC is on.
Make sure the power cable within the PC is connected properly.
If the tray still won't open with the power-on, turn the power-off
and insert a pin(paper clip) into the emergency hole to open.
The tray won't close.
Make sure the disc has been inserted properly.
The PC is not working properly.
See if the jumper(s) is properly connected to the Master/Slave
Selection port.
See if the drive is properly connected to the PC.
See if the floppy disc remains in the PC.
The drive is not working properly.
See if the drive is connected properly to the PC.
See if the device drive program has been installed properly.
The Window OS can't detect the
See if the device drive program has been installed properly.
drive.
Can be an OS problem. Try to reinstall the Windows OS program.
The system won't read the disc.
See if the system detects the drive.
Make sure you use the types of discs that are supported
by the drive.
See if the on/off light turns into green.
Make sure you inserted the disc with the label facing up.
Make sure you are using the right program for disc play-
back.
See if the disc is clean.
See if any congealing has occurred.
Make sure the region code of the drive matches the disc
number.
You can confirm the use of software at the site of our customer support.
Address: www.samsungODD.com
- See " Customer support > Download center > User's manual(PDF) > Software ".
- See " Information > Movie manual > Recording software ".
8
Connecting the Cables to the
DVD Writer
Connecting the Cables
S-ATA Data cable
S-ATA Power cable
1
Connecting the power cable
• The 4-pin power cable from the internal power unit of your computer must
be connected to the power terminal the rear of the DVD Writer drive.
2
Connecting the S-ATA cable
S-ATA Data cable
S-ATA Power cable
4
Technical Specifications
SH-S203B(TS-H653B)/SH-S203D(TS-H653D
Category
DVD Writer
DVD : DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM,
DVD-Video, DVD+R(DUAL) , DVD-R(DUAL), DVD-RAM
Usable Discs
C D : CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G) CD-MIDI, CD-TEXT,
DISC
CD-ROM XA, Mixed Mode CD ‚ CD-I, CD-I Bridge (Photo-CD, Video
CD), Multisession CD(Photo-CD, CD-EXTRA, Portfori
Disc Diameter
4.72 Inch or 3.15 Inch (120mm or 80mm)
Interface Port
S-ATA
Interface
Support
Burst Transfer Rate
S-ATA 1.5Gbps
Access time
CD-ROM
110ms (Random)
(Random)
DVD-ROM
130ms (Random)
Media type
Write
Read
DVD+R
CAV20X
CAV16X
DVD+RW
ZCLV 8X
CAV 12X
DVD+R DUAL
ZCLV16X
CAV 12X
DVD-R DUAL
ZCLV12X
CAV 12X
DVD-R
CAV20X
CAV16X
Data Transfer
DVD-RW
CLV 6X
CAV 12X
Speed(MAX)
DVD-ROM(Single)
-
CAV16X
DVD-ROM(Dual)
-
CAV 12X
CD-ROM
-
CAV48X
CD-R
PCAV48X
CAV40X
US-RW
ZCLV32X
CAV40X
HS-RW
CLV10X
CAV40X
CD-RW
CLV 4X
CAV40X
DVD-RAM
CAV12X
CAV12X
Buffer Memory
2MB
Drive Installation
Horizontal / vertical
Operating
Temperature
41°F ~ 122°F (5°C ~ 45°C)
Environment
Humidity
5 ~ 10% (RH)
Size(Width x Height x Length)
5.34 X 1.65 X 6.69 Inch (148.2 X 42 X 170mm)
Weight
750 g
9

Advertisement

Table of Contents

   Related Manuals for Samsung SH-S203B

   Summary of Contents for Samsung SH-S203B

  • Page 1 2. Do not use low quality discs (i.e., illegal products, scratched or • Samsung Eco-mark damaged discs). The Samsung’s own Eco mark helps consumers to easily understand that Accessories Samsung develops eco-friendly products. This mark represents Samsung’s continuous effort to develop eco-friendly products.
  • Page 2 ÔÓ‡ÊÂÌËfl ˝ÎÂÍÚÓÚÓÍÓÏ ËÎË ‚ÓÁ„Ó‡ÌËfl. • ùÍÓÎӄ˘ÂÒ͇fl χÍËӂ͇ Samsung ÔÓ‚ÂʉÂÌ˲ ‰ËÒ͇. ùÍÓÎӄ˘ÂÒ͇fl χÍËӂ͇ Samsung ÔÓÏÓ„‡ÂÚ ÔÓÚ·ËÚÂβ ΄ÍÓ ÔÓÌflÚ¸, ˜ÚÓ ÍÓÏÔ‡ÌËfl 2. ç ËÒÔÓθÁÛÈÚ ‰ËÒÍË ÌËÁÍÓ„Ó Í‡˜ÂÒÚ‚‡ ( ̇ÔËÏÂ, Samsung ‡Á‡·‡Ú˚‚‡ÂÚ Ë ÔÓËÁ‚Ó‰ËÚ ˝ÍÓÎӄ˘ÂÒÍË ˜ËÒÚ˚Â Ë ·ÂÁÓÔ‡ÒÌ˚ ÔÓ‰ÛÍÚ˚. èË̇‰ÎÂÊÌÓÒÚË Ñ‡Ì̇fl χÍËӂ͇ fl‚ÎflÂÚÒfl ÂÁÛθڇÚÓÏ ÔÓ‰ÓÎÊËÚÂθÌ˚ı ËÒÒΉӂ‡ÌËÈ ÍÓÏÔ‡ÌËË...

This manual is also suitable for:

Sh-s203d

Comments to this Manuals

Symbols: 0
Latest comments: