Sony SRF-V1BT Operating Instructions

4-587-914-15(1)
FM/AM RADIO
with Bluetooth SPEAKER
Operating Instructions
©2016 Sony Corporation Printed in China
SRF-V1BT

Listening to the Radio

1 2
Extend the antenna for Turn on the unit, and select the "FM" or "AM" function.
FM radio reception.
TUNE dial
ENTER
Tip
The power indicator lights up in green while the unit is turned on.
To set the unit to standby mode, press  again.
Presetting stations (5 FM and 5 AM)
1
Tune to the station you want to preset.
Follow the steps in "Listening to the Radio" above.
To adjust the volume To improve FM/AM radio reception
Tips
• The last set volume is stored in the unit's memory.
• VOL + on the unit has a tactile dot. Use the tactile dot as a
reference when operating the unit.
Setting the On Timer
You can set the unit to turn on the radio automatically at the set time.
1 2
Press SETTINGS. Select "On timer."
When setting in standby mode

Turn the TUNE dial to select
an option.

Press ENTER.
Perform the same procedure
for the following steps.
Listening to Music from a BLUETOOTH Device
Using the BLUETOOTH connection, you can listen to music from wirelessly connected
BLUETOOTH devices such as smartphones, tablets, PCs, etc.
Tip
BLUETOOTH wireless technology operates
within a range of about 10 m.
Connecting with a BLUETOOTH device
1
Turn on the unit, and select the "Bluetooth" function.
Press repeatedly.
When using the unit for the first time (if there
The unit automatically
is no pairing information in the unit)
switches to the selected
The unit will automatically switch to pairing mode. In
function in about 2
this case, proceed to step 3.
seconds.
When connecting with the second and
subsequent devices
Proceed to step 2.
Connecting by One-touch (NFC)
1
Compatible smartphones Turn on the NFC function of
the BLUETOOTH device.
NFC-compatible smartphones with
Android™ 4.1 or later installed
NFC
NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as smartphones
and IC tags. Thanks to the NFC function, data
communication – for example, BLUETOOTH
pairing – can be achieved easily by simply
touching NFC-compatible devices together (i.e.,
at the N-Mark symbol or location designated on
each device).
Getting Started
1
Connect the unit to a wall outlet and
charge the unit.
The built-in battery will be fully
charged (" ") in up to 6 hours.
Wall outlet
AC adaptor
(supplied)
To DC IN
Power indicator
Tip
After pressing FUNCTION
once, you can also select a
function by turning the TUNE
dial and pressing ENTER.
Press repeatedly.
The unit automatically
switches to the selected
function in about 2
seconds.
2
Press and hold the desired preset button (1–5) until "Stored to [PRESET x]."
appears on the display.
Example: Presetting a tuned station to the preset button 3
Tips
• If you try to store another station with the same preset
number, the previously stored station will be replaced.
• The preset button 3 on the unit has a tactile dot. Use the
tactile dot as a reference when operating the unit.
3
Set the hour and minute.
Press ENTER.
Hour
Compatible BLUETOOTH devices
Compatibility requirements for the devices are as follows.
Before using a device with this unit, check that it meets
the requirements.
• Devices must support A2DP (Advanced Audio
Distribution Profile) and AVRCP (Audio/Video Remote
Control Profile).
• NFC capability (required only when using the NFC
pairing function of the unit).
If your BLUETOOTH device has an NFC function, this procedure is unnecessary.
See "Connecting by One-touch (NFC)" below.
If there is pairing information in the unit
The last connected
device will be connected
automatically.
2
Touch the BLUETOOTH device
to the N-Mark on the unit.
When using the unit for the first time, make sure to connect the unit to a wall outlet
using the AC adaptor (supplied). Otherwise the unit will not turn on.
2 3
Press SETTINGS. Select "Time."
Display

Turn the TUNE dial to select
an option.

Press ENTER.
Perform the same procedure
for the following step.
Display
3
Select a desired station.
Scan tuning
Press SCAN to start scanning stations.
BACK
ENTER
Listening to a preset station
1
Select the "FM" or "AM" function.
Press repeatedly.
First set the clock. See "Getting Started" for details.
4
Set the station received at the set time.
Press ENTER. Press ENTER. Press ENTER.
Minute
Tip
When selecting from the
preset station list, set the
stations first. See "Presetting
stations (5 FM and 5 AM)" for
details.
About the BLUETOOTH standby mode
The BLUETOOTH standby mode enables the unit to turn
on automatically by making a BLUETOOTH connection
from a BLUETOOTH device.
See "Setting Menu Options" for details.
2
Select "Bluetooth pairing."

Press SETTINGS.

Turn the TUNE dial to select
an option.

Press ENTER.
"Waiting for pairing" appears
on the display.
Listening to music
1
Start playback on the
BLUETOOTH device.
When pairing is completed, the
BLUETOOTH device's name will
appear on the display.
To terminate the BLUETOOTH
connection
Touch the BLUETOOTH device to the
N-Mark on the unit.
4
Set the hour and minute.
Press ENTER.
Hour
Press ENTER.
If a receivable station is found,
"[ENTER]:Select" appears on
the display. Press ENTER to
receive the station. (If you do
not press ENTER within 3
seconds, the search will
Tips
restart.)
• To stop the scanning, press BACK.
• To change the scanning direction,
turn the TUNE dial clockwise or
counterclockwise.
2
Select the desired preset station.
Example: When the preset button 3 is pressed
When setting to the last received station
Press ENTER, and
press SETTINGS to
exit the setting
menu.
When selecting from the preset station list
Press ENTER.

Setting the Sleep Timer

Press SLEEP repeatedly to select the desired time (in minutes).
Tips
• The last set time is stored in the unit's memory.
• You can check the time left until the unit enters standby mode by pressing SLEEP again after
setting the sleep timer.
3
On the BLUETOOTH device, activate the BLUETOOTH function
and perform the pairing procedure.
Select "SRF-V1BT." If "SRF-V1BT" does not
appear, perform a search of the device.
For details, refer to the operating instructions supplied with
the BLUETOOTH device.
If you are prompted to enter a passkey, enter "0000."
2
Adjust the volume.
Press ENTER.
Press ENTER, and
press SETTINGS to
exit the setting menu.
Minute
Tip
You can select the clock display mode,
12-hour clock or 24-hour clock. See "Setting
Menu Options" for details.
Manual tuning
You can manually tune to the desired frequency.
Note
To prevent the preset from being changed by mistake,
do not hold down the preset button.
5
Activate the timer.
" " appears on the display.
The radio turns on at the set time.
To deactivate the timer
Press ON TIMER again.
Note
The On Timer function is disabled in off mode.
When the sleep timer is set, "SLEEP" appears
on the display.
The unit enters standby mode automatically
after a set time has elapsed.
When pairing is completed, the BLUETOOTH
device's name will appear on the display.
To terminate the BLUETOOTH connection
Select the function other than the BLUETOOTH
function.