Advertisement
Listening to Music from an External Device
1
Connect the external device to the unit.
Portable digital music
player, etc.
Audio connection cable without
resistor (not supplied)
To AUDIO IN
Stereo mini plug
2 rings
Listening through Headphones
Connect headphones that have a stereo or monaural* mini plug (not supplied).
Use headphones with a stereo (3-pole) or monaural (2-pole) mini plug. No sound is heard
when using other types of plugs.
Compatible plug types
To (headphones)
Setting Menu Options
Basic Operations:
To go back to the upper menu level
Press BACK.
To exit the setting menu
Press SETTINGS again.
WARNING
Precautions
The validity of the Directive 2014/53/
• Operate the unit only on the power
sources specified in "Specifications."
EU is restricted to only those
For AC operation, use only the supplied
countries where it is legally enforced,
AC adaptor. Do not use any other type
mainly in the countries EEA
of AC adaptor.
(European Economic Area).
• Failure to use the supplied AC adaptor
Hereby, Sony Corporation declares
may cause the unit to malfunction, as
the polarity of the plugs of other
that this equipment is in compliance
manufacturers may be different.
with Directive 2014/53/EU.
The full text of the EU declaration of
conformity is available at the
following internet address:
http://www.compliance.sony.de/
• When operating the unit on the built-in
battery, it is recommended that you
Do not expose the appliance to
remove the AC adaptor from the wall
naked flame sources (for example,
outlet and the DC IN jack. Disconnect
lighted candles).
the plug of the external power source
before operating the unit.
Excessive sound pressure from
• Avoid exposure to temperature
earphones and headphones can
extremes, direct sunlight, moisture,
cause hearing loss.
sand, dust or mechanical shock. Never
leave in a car parked in the sun.
Do not dismantle, open or shred
• Do not expose the unit to strong
secondary cells or batteries.
impact or excessive force. A glass
In the event of a cell leaking, do not
material is used for the display in some
allow the liquid to come in contact
models. If the glass chips or cracks, it
with the skin or eyes. If contact has
may cause injury. In that case, stop
using the unit immediately and make
been made, wash the affected area
sure not to touch the damaged parts.
with copious amounts of water and
• Should any solid object or liquid fall
seek medical advice.
into the unit, disconnect the AC
Do not use any charger other than
adaptor, and have the unit checked by
that specifically provided for use
a qualified personnel before operating
it any further.
with the equipment.
• Since a strong magnet is used for the
Do not use any cell or battery which
speakers, keep personal credit cards
is not designed for use with the
using magnetic coding or spring-
equipment.
wound watches away from the unit to
prevent possible damage from the
Secondary cells and batteries need
magnetism.
to be charged before use. Always
• To clean the casing, use a soft dry cloth.
use the correct charger and refer to
Do not use any type of solvent, such as
the manufacturer's instructions or
alcohol or benzine, which may damage
equipment manual for proper
the finish.
charging instructions.
• Do not operate the unit with wet hands
since it may cause a short circuit.
After extended periods of storage, it
• Make sure not to splash water on the
may be necessary to charge and
unit. This unit is not waterproof.
discharge the cells or batteries
• When you do not use the unit for a
several times to obtain maximum
long time, charge the battery every 6
performance.
months.
• Under certain circumstances, especially
Dispose of properly.
when the air is very dry, it is not
uncommon to experience a discharge
of static electricity, or shock, when your
body comes in contact with another
object, in this case the ear buds
touching your ear(s). The energy from
this natural discharge is extremely
small and is not emitted by your
product but rather a natural
environmental occurrence.
• Listening with this unit at high volume
may affect your hearing. For traffic
safety, do not use this unit while driving
or cycling.
If you have any questions or
problems concerning your unit,
please consult your nearest Sony
dealer.
2
Turn on the unit, and select the "AUDIO IN" function.
Press repeatedly.
The unit automatically switches
to the selected function in about
2 seconds.
Note
Monaural* mini plug
1 ring
Stereo mini plug
2 rings
* When listening to stereo sound using
Other types of plugs
monaural headphones, you will hear
cannot be used.
sound from the left channel only.
3 or more rings
BLUETOOTH options
BLUETOOTH options can be set when the "Bluetooth" function is selected.
Bluetooth pairing
Bluetooth standby
See "Connecting with a BLUETOOTH
When the BLUETOOTH standby mode
device."
is set to "On," the unit enters waiting
mode for a BLUETOOTH connection
even when the unit is in standby
mode. When making a BLUETOOTH
connection from a BLUETOOTH device,
the unit turns on automatically.
Tips
• Set the BLUETOOTH standby mode to "Off" to
• The power indicator lights up in umber while
Note
If the AC adaptor is unplugged, the BLUETOOTH
standby mode is disabled.
A connection cannot be established.
Troubleshooting
• Depending on the device to be
Should any problems persist after
you have made the following checks,
• Perform pairing again. (See steps 2 and
consult your nearest Sony dealer.
General
• To listen to music on a device that does
Display is dim, or no indication is
displayed.
• The unit is being used in extremely
high or low temperatures or in a place
with excessive moisture.
• A BLUETOOTH connection with two
The volume cannot be turned up
when the unit is powered by the
built-in battery.
Pairing fails.
• When the remaining battery level gets
low (when the battery icon is empty),
• Bring the BLUETOOTH device closer to
the maximum volume level is limited to
"22." Charge the unit by connecting the
• Make sure that the BLUETOOTH
AC adaptor (supplied).
The volume level is low in the
"Bluetooth" function or the
• If the BLUETOOTH connection cannot
"AUDIO IN" function compared with
the volume level when listening to
the radio.
• Adjust the volume on the connected
• Delete the model name of this unit
device.
The unit enters standby mode
automatically.
• By default, this unit is set to enter
standby mode automatically after
Pairing using the NFC function fails.
about 15 minutes of no operation or
• Try pairing manually. (See "Connecting
audio signal output. See
"Auto power off" in "Setting Menu
Options" for details.
Radio
Very weak or interrupted sound, or
• Check that the smartphone meets the
unsatisfactory reception.
• If you are in a building, listen near a
window.
• Extend the antenna and adjust the
length and the angle for best reception.
• If a mobile phone is placed close to the
If the unit still does not operate
unit, a loud noise may be heard from
properly
the unit. Keep the phone away from
Try pressing RESET on the bottom using a thin
the unit.
rod. The unit will restart, retaining the
A desired station cannot be received
user-configured settings.
when a preset button is pressed.
• Make sure you have selected the
desired band (FM or AM) before you
press the preset button. One station for
each band can be set to each button.
• You may have held down the preset
button to which the station was
assigned, causing the station to be
replaced by a new one. Assign the
desired station again.
• Preset buttons cannot be used when
the setting menu is displayed.
• If you have moved to another region,
assign the new station to a preset
button.
BLUETOOTH
If maintenance service is performed
There is no sound.
All user-configured settings, such as preset
• Make sure that this unit is not too far
radio stations, the sleep timer, and the clock,
from the BLUETOOTH device, or that
may be initialized.
this unit is not receiving interference
Please note your settings in case you need to
configure them again.
from a wireless LAN, another 2.4 GHz
wireless device, or a microwave oven.
• Check that the BLUETOOTH connection
was completed properly between this
unit and the BLUETOOTH device.
• Perform pairing again. (See
"Connecting with a BLUETOOTH
device.")
• Keep away from metal objects or
surfaces.
• Make sure that the BLUETOOTH
function is activated on the
BLUETOOTH device.
The sound skips or the
correspondence distance is short.
• If a device that generates
electromagnetic radiation, such as a
wireless LAN, other BLUETOOTH
device(s), or a microwave oven is
nearby, move away if possible. Or use
the device and the unit away from such
sources.
• Remove any obstacle between this unit
and the device or move the device and
the unit away from the obstacle.
• Locate this unit and the device as close
to each other as possible.
• Re-position this unit.
• Try using the BLUETOOTH device in
another position.
3
Start playback on the connected
device and adjust the volume.
Setting to Off Mode
You can set the unit to off mode to reduce the power consumption if you do not use the unit.
Other options
On timer
See "Setting the On Timer."
Sound
You can adjust the sound level.
Treble:
Adjusts the level of high-
pitched sound.
Bass:
Adjusts the level of low-pitched
sound.
reduce the power consumption when the
unit is in standby mode.
the unit is in standby mode, and when the
BLUETOOTH standby mode is turned on.
Messages
connected, it may require some time to
start communication.
No preset
• No station in the selected band (FM or AM)
3 of "Connecting with a BLUETOOTH
has been preset to the pressed button.
device.")
not have a BLUETOOTH function, such
as a PC without BLUETOOTH function,
connect the device to the AUDIO IN
jack on the unit. (See "Listening to
Music from an External Device" for
details.)
BLUETOOTH devices cannot be
established at the same time.
the unit.
function is activated on the
BLUETOOTH device.
be established after pairing is
completed, perform step 3 of
"Connecting with a BLUETOOTH
device."
from the BLUETOOTH device and
perform pairing again. (See steps 2 and
3 of "Connecting with a BLUETOOTH
device.")
with a BLUETOOTH device.") Some
NFC-compatible smartphones may not
be paired using the NFC function of this
unit, depending on the features or
specifications of the device.
compatibility requirements. (See
"Compatible smartphones" in
"Connecting by One-touch (NFC).")
Setting the Brightness of the Display
Press
repeatedly to select the desired brightness.
Note
When the unit is powered by the built-in battery, the backlight of the display
turns off in about half a minute after operation.
Press and hold for about 2 seconds to set to off mode.
The display turns off.
Note
The On Timer function is disabled in off mode.
Tip
When pressing while the unit is turned on, the unit enters standby mode. In standby mode,
the backlight of the display can be turned on if desired and the On Timer function is enabled.
Time
Auto power off
Time setting:
Sets the clock. See
When "Auto power off" is set to
"Getting Started" for details.
"Enable (15min)," the unit enters
standby mode automatically in about
12H/24H:
Select the clock display
15 minutes if there is no operation or
mode, 12-hour clock or 24-hour clock.
audio signal output.
Note
Initialize
The clock will be reset if the AC adaptor is
unplugged and the built-in battery is
Select "OK" to initialize the unit to the
completely exhausted.
factory default settings. All settings,
such as preset radio stations and the
Beep
pairing registration information, will be
Select "On" to activate the beep sound
deleted.
when you operate the unit.
Usage life of lithium-ion battery
Specifications
BLUETOOTH: Approx. 32 hours*
FM: Approx. 31 hours*
1
AM: Approx. 15.5 hours*
Operating temperature range
*
1
When the specified music source is used and
5°C – 35°C
the volume level of the unit is set to the
following
Time display
— BLUETOOTH: 20
24-hour system or 12-hour system
— FM: 25
— AM: 30
Frequency range
BLUETOOTH: Approx. 15 hours*
FM: 87.5 MHz – 108 MHz
FM: Approx. 25.5 hours*
(0.05 MHz step)
AM: Approx. 15.5 hours*
AM: 531 kHz – 1,602 kHz
*
2
When the specified music source is used and
(9 kHz step)
the volume level of the unit is set to
maximum
Speaker
Approx. 45 mm dia., 4 Ω, stereo
Power consumption
At the standby mode
Audio power output
0.6 W or less
2.5 W + 2.5 W (when the unit is
(when the brightness of the display
powered by the supplied AC
is set high and the BLUETOOTH
adaptor)
standby mode is set to on)
1.5 W + 1.5 W (when the unit is
At the off mode
powered by the built-in battery)
0.2 W or less
BLUETOOTH
Dimensions
Approx. 106 mm 172 mm 117 mm
Communication System
BLUETOOTH Specification version
(W/H/D) including projecting parts
4.1
and controls
Output
Mass
BLUETOOTH Specification Power
Class 2
Approx. 880 g
Maximum output power
Supplied accessories
3 dBm
AC adaptor (AC-E5820) (1)
Maximum communication range
Warranty (1) (Europe only)
Line of sight approx. 10 m*
1
Frequency band
Design and specifications are
2.4 GHz band
subject to change without notice.
(2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS
Compatible BLUETOOTH Profiles*
2
A2DP
(Advanced Audio Distribution Profile)
AVRCP
(Audio/Video Remote Control Profile)
Supported Codec*
3
SBC*
4
Transmission range (A2DP)
20 Hz - 20,000 Hz
(Sampling frequency 44.1 kHz)
*
The actual range will vary depending on
1
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna's performance, operating system,
software application, etc.
*
BLUETOOTH standard profiles indicate the
2
purpose of BLUETOOTH communication
between devices.
*
3
Codec: Audio signal compression and
conversion format
*
4
Subband Codec
NFC
Operating frequency
13.56 MHz
Input
AUDIO IN jack
(ø 3.5 mm, stereo mini jack)
Output
(headphones) jack
(ø 3.5 mm, stereo mini jack)
Power requirements
Built-in lithium-ion rechargeable
battery
Power
DC 5.8 V 2.0 A (using the supplied
AC adaptor connected to AC 100 V –
240 V, 50 Hz/60 Hz power supply) or,
using built-in lithium-ion battery
License and Trademark Notice
1
• The BLUETOOTH word mark and
1
logos are owned by the Bluetooth
SIG, Inc. and any use of such marks
by Sony Corporation is under license.
• The N Mark is a trademark or
registered trademark of NFC Forum,
Inc. in the United States and in other
2
countries.
• Android™ is a trademark of
2
Google Inc.
2
• Other trademarks and trade names
are those of their respective owners.
®
In this manual, ™ and
marks are
not specified.
Advertisement
