Sanitaire 680 Series Owner's Manual page 7

Attach Lower Handle
Raise the dust cup support. Push the lower
handle (largest end down) through the tube
of the dust cup support and into the handle
socket at the back of the cleaner. Make
sure the notches on the lower handle
face the rear of the cleaner (Fig. 1). Align
the holes, insert a 2-part bolt (A), and
tighten.
Lower
Handle
Assemble Upper Handle
Hold the upper handle so it curves away
from the cleaner. Then push it down over
the lower handle. Secure with the other 2-
part handle bolt (A).
Secure Cord Clamp
Secure the electrical cord to the dust cup
support with the cord clamp and screw (D).
Place the cord clamp over the electrical
cord. Screw the clamp to the tab below the
left latch; start the screw by hand, then
tighten.
A
Tube
Dust Cup
Support
Toward Rear
of Cleaner
A
Handle
Socket
A
Fig. 1
Upper
A
Handle
Lower
Handle
Handle
Socket
7