Table of Contents
Advertisement
SV-BODYCAM USER GUIDE
4
Installation
The SV-BodyCam requires a USB driver to be installed to properly
communicate with a PC and the SV-BodyCam Local Agent II software.
The appropriate software downloads can be found at Safety Vision's FTP site -
Contact your Safety Vision Account Executive for URL and login information to
access Safety Vision's FTP site.
NOTE: Both the USB driver and the Local Agent II software must be installed with
Administrator privileges.
Install the USB driver FIRST and then install Local Agent II.
NOTE: Users running Windows 8.1 and Windows 10 MUST disable the Driver
Signature Enforcement on the PC in order for the USB driver to be installed
properly. Please see Appendix A: Disabling Driver Signature Enforcement on
Windows 8.1 and Windows 10 for step-by-step instructions.
If prompted by firewall or anti-virus application, allow the file to install.
After installing the USB driver, install the Local Agent II software.
Hide quick links:
Advertisement
Table of Contents
