Safety Vision SV-BODYCAM User Manual page 25

SV-BODYCAM USER GUIDE
22
Recharging the Battery
The SV-BodyCam is provided with built-in rechargeable batteries.
When low battery occurs, the SV-BodyCam gives a sound for
prompting and an icon prompt will also be shown on the screen.
Using the Docking Station
Plug the AC power adapter to an appropriate power source and
connect it to the docking station. The Status LED indicator located on
the docking station will display solid green when receiving power.
Insert the SV-BodyCam firmly into the docking station. The Status
LED indicator on the SV-BodyCam will display solid red when
charging, and turns off when full charging is achieved.
NOTE 1: It is recommended to power OFF the SV-BodyCam to charge
the batteries. The unit will power off automatically after 2 minutes when
charging; If the SV-BodyCam has the Pre-record function turned on, the
unit must be powered OFF first before charging.
NOTE 2: In order to make the battery fully charged, it is recommended
to only disconnect the charging cable/adaptor when the Status LED
indicator located on the front of the SV-BodyCam is off.
NOTE 3: Charge the batteries once every 3 months during long-term
non-use, to avoid failure of the batteries.
NOTE 4: The SV-BodyCam is also available to charge by car charger, and
multi-bay docking station.