Basic Operation; Sleep Mode - Safety Vision SV-BODYCAM User Manual

SV-BODYCAM USER GUIDE
13

Basic Operation

Power ON / OFF
To power ON the SV-BodyCam, press and hold the Power Button
located on the side of the unit, for two (2) seconds until the unit
beeps (the LCD screen will automatically turn on) .
When powered ON, the Status LED indicator on the front of the unit
displays solid green.
To power OFF the SV-BodyCam, press and hold the Power Button for
2 seconds, until you hear the power down chime. The unit is now
turned off.

Sleep Mode

After three (3) minutes of inactivity, the SV-BodyCam turns off the
LCD screen and enters into sleep mode to conserve power. While in
sleep mode, the Status LED indicator on the front of the unit displays
flashing green. Simply press any button on the SV-BodyCam to exit
sleep mode and to perform the button's respective function.