STATRON 2256.1 Operation Instruction
  1. Manuals
  2. Brands
  3. STATRON Manuals
  4. Power Supply
  5. 2256.1
  6. Operation instruction

STATRON 2256.1 Operation Instruction

Hide thumbs
1
2
3

Advertisement

Table of Contents

The designated application of the electricity supply device encloses:
- The supply of an adjustable earth-free DC voltage in the area between 1.5 V to 15 V with a stream from 1.5A.
Attention Absolutely read!
Exactly peruse these instructions. With the damages which are caused by nonobservance of the instructions the
guarantee claim goes out. For secondary damages we take over no liability.
1st short description
The electricity supply device is built up as a linear regulator. The nets voltage of 230 V 50 hertz becomes about a
dividing transformer with connected at the outlet side bridge rectifier and loading condenser . The control of the
transistor is on the control leader record. With the built-in potentiometer the source tension on the desired value can be
put. The opposed value is readable on the analogous instrument.
The net protection is inserted in the device and accessible only after opening the case. (see security tips 2.6... 2.8!)
The device orders of an electronic stream limitation and temperature protection them the device and the consumer
protect.
Operation instruction
Type 2256.1

Power supply

1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2256.1 and is the answer not in the manual?

Questions and answers

Related Manuals for STATRON 2256.1

Summary of Contents for STATRON 2256.1

  • Page 1: Power Supply

    Operation instruction Type 2256.1 Power supply The designated application of the electricity supply device encloses: - The supply of an adjustable earth-free DC voltage in the area between 1.5 V to 15 V with a stream from 1.5A. Attention Absolutely read! Exactly peruse these instructions.
  • Page 2 2. Safety notes the power supply unit is in safety class system I as well as in accordance with VDE 0411 and VDE 0805 (EN60950) structured. The supply transformer is structured and with 3,75 kVeff is primarysecondarily checked according to DIN VDE 0551 as safety insulating transformer. It is radio-screened in accordance with VDE 0875T11 curve B.
  • Page 3 3. Bedienungselemente 1. socket plus 2. socket minus 3. net cable 4. LED 5. Set button 6. net switch 7. analog display 4th getting started a) Connection Connect the net plug of the electricity supply device with a 230outlet VAC and switch on the device with the net counter. The control - LED "ON"...

Table of Contents