Simplicity 1695764 Operator's Manual page 17

Adjusting Wheels and Drag Stake
The wheels on the mini cultivator can be adjusted to one
of three positions. The lowest wheel position is used for
transporting the mini cultivator across a smooth level
surface while the engine is not running. The two higher
positions are used when cultivating in soil and help
stabilize the unit when cultivating at different depths.
SEE FIGURE 6.
To adjust wheels up or down, SEE FIGURES  AND
.
1. Pull the locking metal sleeve against the spring until
it releases from one of the three holes in the vertical
guide.
2. Slide the wheel set up or down to the desired
position, and release the locking metal sleeve until it
locks into one of the three holes in the vertical guide.
The drag stake is used to help regulate cultivating depth
and control the mini cultivator from leaping forward
during operation. Resistance to forward motion is
greatest when the drag stake is set in its lowest position
allowing for deeper cultivation.
To adjust the drag stake, SEE FIGURE .
1. Pull the pin out of the drag stake mount hole.
2. Position the drag stake so the pointed tip is directed
downward.
3. Insert the pin into the hole that achieves desired
depth.
OPERATOR INSTRUCTIONS
Mini Cultivator
FIGURE 
FIGURE 
FIGURE 6
Page 1