Mounting - Primepower Workshop charger Manual

MOUNTING

If the charger is to be mounted, please ensure that the following conditions for the surrounding area have been
fulfilled:






Mount the charger on an even, horizontal or vertical surface. The four openings on the rubber feet are used for
mounting the charger. Please use bolts of 5 mm diameter.
Example of mounting the charger vertically
IMPORTANT INFORMATION!
Irrespective of whether the charger is mounted horizontally or vertically, the built-in fan ensure
optimum cooling.
Dry, well-ventilated and dust-free assembly site
Shortest possible distance to the batteries to enable short cable lengths to be used
Do not install the charger directly next to or above the batteries.
The charger must be protected against the effects of dust and moisture.
Ensure that the fan can freely suck in cooling air.
Do not install the charger directly next to or above flammable materials.
Mounting bolts, 5mm