Mainteance And Service - Primepower Workshop charger Manual

MAINTEANCE AND SERVICE

Regular inspections
Please check the charger as follows before every use:





WARNING!
Always check the charger and the cable for damage each time before using the device!
Do not use a damaged device or a device with a damaged attachment cord. Have this fixed
immediately!
Always have the device checked if it has come into contact with liquids!
Have the device checked regularly by a trained electrician! If necessary, any repairs that are
required should only be carried out by Primepower!
Accessories
The following accessories can be ordered from Primepower's service team at
support@primepower.se
Please include the part number in your order.
POS.
1 Charging cable 2x 10 mm2, 1.5 m with terminal clamps 200 A
2 Charging cable 2x 10 mm2, 5 m with terminal clamps 200 A*
3 Powercord NEUTRIK 230VAC 1.5M
4 Powercord NEUTRIK 230VAC 5M
5 NEUTRIK Connector NAC3FCA 230V/20
6 Workshop Charger Wall Mount
Are mains cable and plug undamaged?
Are charger cable and charging clips undamaged?
Is the charging cable securely fastened to the charger?
Is the charger externally undamaged and unopened?
Have you ensured that the charger is not in contact with water, oil or other liquids?
DESCRIPTION CHARGER
12/24V 70/60A
12/24V 70/60A
All Workshop chargers
All Workshop chargers
All Workshop chargers
All Workshop chargers
ART. NUMBER
0360063
0360064
2810029
2810031
2870010
1740080