Washing Clothes Using Cycle Selector - Samsung WD8122CVC User Manual

washing a load of laundry

Washing clothes using cycle selector

Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink's water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Cottons, Towel, and Blanket cycles. It is only
necessary if your clothing is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle
according to the type of material: Cottons, Blanket,
Quick, Delicate, Towel, Wool, Rinse+Spin, Clean Tub.
The relevant indicators will illuminate on the control
panel.
8. At this time, you can control the wash temperature, the
amount of rinses, the spinning speed, and the delay
time by pressing the appropriate option button.
9. Press the Start/Pause button and the wash will begin.
The process indicator will light up and the remaining
time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
22_ washing a load of laundry
WD8122CVB-02574C_EN.indd 22 2008-06-05 ¿ÀÈÄ 2:09:46