Platinum PT-PP70 Quick Setup Manual

PT-PP70
70" POLEPOD COMBO
QUICK SETUP GUIDE
Before using your new product,
please read these instructions to prevent any damage.

PACKAGE CONTENTS

• Polepod Combo
• Carrying case
• Accessory bag
• Rubber foot (for monopod)
• Mounting screw (for monopod)
• Wrench (for mounting screw)
• Hand strap (attached to mounting ring on the center column)
• Quick Setup Guide
FEATURES
• Light-weight, compact size
• Removable center column can be used as a 63-inch monopod with the head or a 61-inch
monpod without the head
• Supports most cameras or camcorders up to 5.5 lbs (2.5 kg)
• Adjustable column lets you quickly adjust the height
• 26.8" (68.0 cm) folded length and carrying bag for portability
• Quick leg setup with ultra leg locking system
• Panoramic angles: 360° horizontal and 90° vertical
• Ball head for smooth pan and tilt to the position you want
# ITEM DESCRIPTION
Locks the quick-release plate to the mounting base plate.
1 Quick-release mounting plate
locking lever
Slide to select the leg angle: low, semi-low, or normal.
2 Leg angle tab
3 Leg lock/Rubber foot Provides quick leg adjustment.
4 Mounting screw Secure your camera or camcorder to the quick-release
mounting place with this screw.
5 Quick-release mounting plate Mount your camera to this removable plate.
Slide the quick-release mounting plate into this base plate.
6 Mounting base plate
7 Head locking lever Locks the horizontal and vertical movement of the head.
8 Center column locking lever Locks the center column in place.
Center column converts to a 4-section monopod.
9 Monopod
10 Hand strap and ring Attach the hand strap to the ring on the center column for
easy carrying.
11 Column lock Locks the center column height for the mini tripod.
SETTING UP YOUR POLEPOD
1 To extend a leg, grasp the rubber foot and turn it counter-clockwise to release the lock. Pull the
leg to the length you want, then turn the rubber foot clockwise to lock the leg in place.
Cautions:
• Incorrectly securing a leg can cause the tripod leg to retract unexpectedly and could result in damage to
the polepod or to the attached camera or camcorder.
• Never leave the polepod set up and unattended. Polepods are less stable than full length tripods and
can easily tip over.
Leg lock/Rubber foot
2 To adjust the height of the center column, flip open the center column locks on the center column.
Extend the column to the height you want, then flip the locks to lock the column in place.
Caution: Incorrectly securing a lock could cause the center column to retract unexpectedly and could result
in damage to the polepod or attached camera or camcorder.
3 To set the angle position of the legs, slide the leg angle tab, lift the leg all the way up, then
lower the leg until the leg angle tab locks at the angle you want (low, semi-low, or normal).
Leg angle tab