Details ................5 PGA-0510 Analog Ohm Meter ........5 ISCLAIMER Specifications are subject to change without notice. Littelfuse, Inc. is not liable for contingent or consequential damages, or for expenses sustained as a result of incorrect application, incorrect adjustment, or a malfunction.
Page 4
PGR-3200 Insulation Monitor Page iii Rev. 3-E-040918 This page intentionally left blank.
0 to infinity using indication. An analog output is provided for predictive optional meter PGA-0510. See Figs. 2, 3, and 6. maintenance trending. The PGR-3200 can be used to detect faults in 2.5 R EMOTE ESET ungrounded systems up to 6 kV.
Mounting, terminal-block connections, and wiring must conform to applicable local electrical codes. Check all applicable codes prior to installation. The PGR-3200 can be surface or DIN-rail mounted. See Fig. 1. Use terminal 6 (L1) as the line terminal and terminal 5 (L2/N) as the neutral terminal.
FIGURE 4. PGH-5000 Outline and Mounting Details. 3.1 PGH-5000 PGH-6000 3200 terminal 29. (PGR-3200 terminal 2 is not used.) For For 5-kV and 6-kV systems, connect the PGR-3200 to the PGR-3200 to PGH-5000/PGH-6000 distances greater than 10 m (30’), use shielded cable, and connect the cable shield monitored circuit with a PGH-5000 and PGH-6000 respectively.
Connect a 20 k resistor between one phase and ground Current to Ground .....2.5 mA maximum at the line side of the starter or motor terminal box. Select a phase that is not connected to PGR-3200 terminal 2 (or Terminal M Maximum PGH-5000 PGH-6000).
PGR-3200 Insulation Monitor Page 8 Rev. 3-E-040918 APPENDIX A PGR-3200 REVISION HISTORY MANUAL MANUAL PRODUCT REVISION RELEASE DATE REVISION (REVISION NUMBER ON PRODUCT LABEL) April 9, 2018 3-E-040918 November 19, 2015 3-D-111915 August 4, 2015 3-C-080415 ANUAL EVISION ISTORY 3-E-040918...