Specifications are subject to change without notice. 2.5.2 OUT R ............2 Littelfuse, Inc. is not liable for contingent or consequential 2.6 Remote Test..............2 damages, or for expenses sustained as a result of incorrect 2.7 Remote Reset ..............2 application, incorrect adjustment, or a malfunction.
Page 4
PGR-6101 Ground-Fault & Insulation Monitor Page iii Rev. 0-C-041918 This page intentionally left blank.
1-mA-analog output. and the trip time to progressively increase upstream. The The PGR-6101 can be directly connected to a supply up amount of equipment removed from the system will be a to 1.3 kV.
The green LED labelled ACTIVE indicates that the in Fig. 2. Offline monitoring function is active. The insulation A PGR-6101 can be surface or DIN-rail mounted. See monitoring or lockout function is active when terminals 27 Fig. 1. and 28 are connected. See Section 2.2.
PGR-6101 Ground-Fault & Insulation Monitor Page 4 Rev. 0-C-041918 3.1 PGH-5000 PGH-6000 (PGR-6101 terminal 2 is not used.) For PGR-6101 to 5-kV 6-kV systems, connect PGH-5000/PGH-6000 distances greater than 10 m (30’), use shielded cable, and connect the cable PGR-6101 to the monitored circuit with a PGH-5000 and PGH-6000 respectively.
PGR-6101 Ground-Fault & Insulation Monitor Page 9 Rev. 0-C-041918 4.2 PGH H 5. O ENSION OUPLERS RDERING NFORMATION Maximum Line Voltage: PGH-5000 ........ 5,000 Vac PGH-6000 ......6,000 Vac Current to Ground ..... 2.5 mA maximum Terminal M Maximum Voltage ......... 50 Vac PGA-0500 .....Analog Percent Current Meter...
10% of the SE-400 setting. Set the test circuit. The connection of the current-sensor current to 120% of the PGR-6101 setting. Inject the secondary to the PGR-6101 is not polarity sensitive. test current through the CT window for at least 2.5 seconds.
CT-input terminals 16 and 17. Select a phase that is not connected to PGR-6101 terminal 2 (or the PGH-5000 or PGH-6000). The PGR-6101, operating in Offline mode as indicated by the green ACTIVE LED, will alarm, operating the K1 low insulation output relay and lighting the red <R LED.
PGR-6101 Ground-Fault & Insulation Monitor Page 12 Rev. 0-C-041918 APPENDIX A PGR-6101 REVISION HISTORY MANUAL MANUAL PRODUCT REVISION RELEASE DATE REVISION (REVISION NUMBER ON PRODUCT LABEL) April 19, 2018 0-C-041918 February 6, 2014 0-B-020614 November 22, 2013 0-A-112213 ANUAL EVISION...