Andrew EASIAX Cable Prep Tool Installation Instructions

Installation Instructions

EASIAX
®
Prep Tool
for LDF4 Style Cable
Description
The EASIAX ® Cable Prep Tool quickly cuts the cable
jacket and outer conductor in one operation. Cuts are
uniform and precisely spaced for accurate and easy
fitting of the connectors.
Each cutter blade is positioned off center so that
reversing the blade provides another cutting edge.
Thus, approximately 100 cuts can be made before
replacing the blade.
The cutter blades are easlily replaced by pulling off the
blade slot access cover. Removing the opposite cover
provides access to stored blades.
Ordering information:
• MCPT-L4 Tool and 5 blades
• MCPT-BK4 Blade Kit (5 blades) -- replacement blades
for MCPT-L4 tool
Reinforced
polymer
construction
Cable
Blade storage
Steel hinge pin
access cover
ensures smooth
MCPT-L4 tool may be used to prepare cable for the
following type connectors
All standard
and following
L4PNM-C
L4NM-C
L4PNF-C
L4NM-HC
L4PNM-HC
L4PDF-RC
CAUTION. Be careful when handling the Cable
Prep Tool to avoid accidental contact with the cutter
blades.
Corrugation
guide holds
Conductor
cable in correct
cutter blade
cutting position
Jacket cutter
blade
operation
Bulletin 237647
One-piece Ring Flare
L4PDF-RPC L4PDM-RC
L4PDM-RPC L4PNM-RC
L4PNF-RPC L4PNF-RC
L4PNM-RPC
L4PDR-RPC
Blade slot
access cover