LEGRAND Wattstopper LMIR-100 Installation Instructions Manual

No: 25096 – 10/16 rev. 1
Catalog Number • Numéro de Catalogue • Número de Catálogo: LMIR-100
Country of Origin: Made in China • Pays d'origine: Fabriqué en Chine • País de origen: Hecho en China
This unit is pre-set for Plug n' Go™ operation, adjustment is optional.
For full operational details, adjustment and more features of the product, see the
DLM System Installation Guide provided with Wattstopper room controllers, and
also available at www.legrand.us/wattstopper.
Installation shall be in accordance with all applicable regulations, local and
NEC codes. Wire connections shall be rated suitable for the wire size (lead and
building wiring) employed.
For Class 2 DLM devices and device wiring: To be connected to a Class 2 power
source only. Do not reclassify and install as Class 1, or Power and Lighting
Wiring.
PLACEMENT GUIDELINES
The LMIR-100 provides an IR remote interface for DLM devices that
are not within line of sight of the user. It accepts commands from DLM
IR devices such as hand-held remote controls, and forwards them to
the DLM Local Network. Choose a place for the LMIR-100 that it is in
direct view of the user. Avoid obstruction by objects such as furniture or
partitions. It has a 360˚ 30-35 foot (10m) line of sight receiving range.
WARNING: DO NOT USE THE DLM SYSTEM TO
CONTROL LOADS OTHER THAN LIGHTING IF
THE LOAD IS NOT IN VIEW OF A PERSON AT ALL
CONTROL LOCATIONS. DO NOT USE DLM TO CONTROL
ANY LOAD THAT MIGHT BE DANGEROUS OR CAUSE A
HAZARDOUS SITUATION IF ACCIDENTALLY ACTIVATED.

MOUNTING THE RECEIVER

The device has an adjustable head to accommodate multiple mounting
methods and building materials or fixture walls up to 5/8" thickness.
Ceiling or fixture wall
0" - 0.5" adjustable
for mounting material
Wattstopper
DLM - Infrared Receiver
Installation Instructions • Instructions d'Installation • Instrucciones de Instalación

SPECIFICATIONS

Input Voltage ..................................................................... 24VDC
Current Consumption .............................................................5mA
Power Supply ................................. Wattstopper Room Controller
Connection to the DLM Local Network ...................... 1 RJ-45 port
DLM Local Network characteristics when using LMRC-11x/2xx
room controllers:
Low voltage power provided over Cat 5e cable (LMRJ);
max current 800mA. Supports up to 64 load addresses,
48 communicating devices including up to 4 LMRC-10x
series and/or LMPL-101 controllers.
Free topology up to 1,000' max.
Environment ................................................. For Indoor Use Only
Operating Temperature .................32° to 131°F (0° to 55°C)
Storage Temperature ...................23° to 140°F (-5° to 60°C)
Relative Humidity .......................5 to 95% (non condensing)
Other:
RoHS compliant
Patent Pending
40°
ATTACHING THE LMRJ CABLE
®
32'
(10m)
ceiling
height