Advertisement
Parameter Table For Each Operation Mode
Symbol Description :
(use),
(no use)
Displayed
F1
F2
F3
F4
F5
F6
F7
F8
Characters
SP Group (Comparative Value Setting Group)
PS Group (Prescale or Time Option Setting Group)
Setup Group (IN / OUT Setting Group)
Option Group (Option Setting Group)
The communication setting is a system operation which is not
related with the modes
The remote control is a system operation which is not related with the modes
Peak Display Group (Peak Value Save Group)
Default Value of Parameter
Initial
Initial
Initial
Initial
Output Mode
Standard
Mode
Comparative HH
Output HH: Comparative HH
Comparative H
F9
Displayed Value
Comparative L
Output H : Comparative H
Comparative LL
Displayed Value
Hys
Output HH
Output PASS: when output HH, H,
Hys
Output H
Output PASS
Output L
: Comparative L
Hys
Displayed Value
Output L
Hys
Output LL : Comparative LL
Output LL
Displayed Value
Zone Output
Mode
Output HH: Comparative HH
Comparative HH
Displayed Value
Comparative H
Output H : Comparative H
Comparative L
Comparative LL
Displayed Value <
Hys
Comparative HH
Output HH
Hys
Output PASS: when output HH, H,
Output H
Output PASS
Output L : Comparative L <
Hys
Output L
Displayed Value
Hys
Output LL
Comparative LL
Output LL : Comparative LL
Displayed Value
H Level
Mode
LL L H HH
Comparative HH
Output HH: Comparative HH
Comparative H
Displayed Value
Comparative L
Output H : Comparative H
Comparative LL
Hys
Output HH
Output PASS: when output HH, H,
Hys
Output H
Output PASS
Output L : Comparative LL
Hys
Output L
Displayed Value
Hys
Output LL
Output LL : Comparative LL
Displayed Value
LL L H HH
L Level
Mode
Output HH: Comparative HH
Comparative HH
Displayed Value
Comparative H
Comparative L
Output H : Comparative H
Comparative LL
Displayed Value
Hys
Output PASS: when output HH, H, L,
Output HH
Hys
Output H
Output L : Comparative LL
Output PASS
Hys
Displayed Value
Output L
Output LL : Comparative LL
Hys
Output LL
Displayed Value
ONE short
Mode
Output HH: Comparative HH
Comparative HH
Displayed Value
Comparative H
Comparative L
Output H : Comparative H
0.3s
Comparative LL
Displayed Value <
0.3s
Comparative HH
Output HH
Output L : Comparative LL <
Output H
0.3s
Displayed Value
Output PASS
Comparative L
0.3s
Output L
Output LL : Comparative LL
Output LL
Displayed Value
Double Deviation
Mode
In the case of outputting when the SV is set and it is higher than HH deviation,
H deviation, L deviation, LL deviation from the SV
SV Auto Setting: The present displayed value is saved by pressing the front
+
keys
SV display: The saved SV is displayed SV by pressing
by pressing
key one more time then it will display the present value
HH Deviation
Deviation Setting Range:
H Deviation
0.0001 ~ 99999
SV
L Deviation
LL Deviation
HH Deviation Output
H Deviation Output
PV
SV : Setting Value
L Deviation Output
PV : Displayed Value
LL Deviation Output
Function Description
Auto Zero Time
(note 3)
The function is that if there is no input value in the time which is set as
Auto Zero Value, then the displayed value will be 00000 by
compulsion. In the case of there is no pulse input in a period of time or
the predicting setting when the stop of the revolving object will be
occurred, it can be set and used the time as the setting time of Auto Zero.
The setting time of Auto Zero is from 0.1 sec. to 9999.9 sec.
L, LL is OFF, it is ON
Starting Compensation Timer Function
After turning the power ON, as invalidating the measurement in the some
periods of time, the function limits the faulty output caused by the faulty
value which is affected by the chattering or inputting the starting current or
etc. irregularly.
Specially, when starting the revolving object, it validates in the case
that it does not make the comparative (L, LL) judgment by the low
speed revolution operation.
The setting time of the
starting compensation
from 0.1 sec. to
99.9 sec.
L, LL is OFF, it is ON
Display Cycle Setting Function
This is the function which can change the cycle about the display cycle
of the displayed value so that it displays in the time unit of the set cycle.
Setting Display Cycle = 0.05/0.5/1/2/4/8 sec.
Time Unit Selection Function
Displayed Value
As selecting the measurement value in the various time units, the
function displays the values efficiently.
L, LL is OFF, it is ON
The time unit function can display after selecting one between the
decimal system and sexagesimal system.
The time unit is applied only for F3, F4, F5, F6 mode
Parameter Description
Menu Setting Flow Chart
LL is OFF, it is ON
Display
Notice 1)
2 s
Key Description
Notice 1) : Press
Notice 2) : If you press
Parameter Group Flow Chart
SP Group (Comparative Setting Group)
Setting Menu
key and if
Note 6) the display only product, BP6-5AN and the non-main output product, BP6-5A6, are not displayed like the above parameter comparative setting
group. If each parameter is set and the hysteresis value is inputted, you can stably obtain the desired output.
Peak Hold or Reset Function
This function displays MAX value and MIN value in the comparative values. It is
possible to select a function by the one-touch button.
Peak Hold Setting
Peak Hold Save & Confirmation
(note 5)
MAX Peak Value :
MIN Peak Value :
Hysteresis Function
In the case of the measured value becomes unstable around the
comparative value, set the hysteresis value from the setting value in
order to prevent the unstable operation in the output.
Comparative L(LL)
For the comparative value HH, H, the decreased value is applied as the
hysteresis value and for the comparative value LL, L, the increased
Display Value: 00000
value is applied as the hysteresis value.(The default setting is 1 and 0
can not be set.)
Power ON
Setting
Comparative HH, H
time
L(LL) Output
Comparative L, LL
(note 5)
Menu
Peak Value Save
Comparative Value Save
Prescale Time Set
2 s
Notice 2)
2 s
2 s
for 2 sec. to enter
and release
key to enter Peak Group
for 3 sec, You can enter Menu.
Meaning
Comparative Setting
If set a measuring value under a decimal point, below set value
can be convert to be set under decimal point
Group Selection
Comparative HH Setting
Comparative H Setting
F1, F2, F7, F8, F9 : 0 ~ 99999
Set Value(Only Out-d)
F3, F4, F5, F6 : 0 ~ set time range
Comparative L Setting
Comparative LL Setting
(note 4)
Displayed
MAX
MIN
value
save the value
save the value
Hysteresis (0<Hys)
Hysteresis (0<Hys)
Output HH, H
Output L, LL
IN/OUT Set
Option Set
2 s
2 s
Setting Contents
Default
Advertisement
