Mount The Myq Smart Garage Hub; Apply Warning Label - Chamberlain MYQ-G0301 Manual

Wireless Setup and Installation
Step 9: Mount the MyQ Smart Garage Hub
• Install the MyQ Smart Garage Hub on the ceiling 4-6 feet from the garage door opener, and within 4 feet
from an AC power outlet.
1. Use the MyQ Smart Garage Hub bracket as a template to drill 5/32" pilot holes.
2. Attach the bracket.
3. Slide the MyQ Smart Garage Hub onto the bracket.
• Plug it in and confirm the hub's green LED turns on solid.
If the hub's LED does not turn on within a few minutes, see
The MyQ Smart Garage Hub light MUST be visible if you're standing in the doorway of the garage.
Door Control
Warning Label
Step 10: Apply Warning Label
• Attach the warning label to the wall next to the door control.
Troubleshooting
MyQ Smart
Garage Hub
Light
TIP: Wrap excess power
adapter cable around the
mounting bracket.
- 13 -
on page 16.