Samsung SGH-i560V User Manual page 77

Managers
• Server ID: set the ID of the remote
server
• Server password: set the password
that must be used by the device
manager to sync your device
• Access point: set an access point
• Host address: set the web address
of the host server
• Port: set a port to use for the device
manager
• User name: set a user name for this
profile
• Password: set a user password for
this profile
• Allow configuration: set to allow
the server to configure your device
74
• Auto-accept all requests: set to
automatically accept new
configuration requests
• Network authentication: set to
require network authentication
4. When you are finished setting the
options, press <Back>.
Start a configuration session
1. In Standby mode, press [
→ Device manager.
2. Scroll to a server profile and press
<Options> → Start configuration.
3. Press <Yes> to confirm.
4. If required, scroll to an access point
and press .
] → Tools