Table of Contents
Advertisement
OPP: Object Push Profile – This profile is based on the
Generic Object Exchange (OBEX) profile which uses pre-
defined object formats. The object formats are vcard, vcal,
vmsg and vnote.
Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish trusted
connections between your phone and another Bluetooth
device. When devices are paired, a passkey is shared between
devices, allowing for fast, secure connections while bypassing
the discovery and authentication process.
To pair your phone with another Bluetooth device:
1.
Select Menu > Tools> Bluetooth > Add New > Search.
(Your phone will display a list of discovered in-range
Bluetooth devices.)
2.
Select the device you wish to pair with and press
3.
Enter the passkey and press
Waiting for Pairing
If you are going to be using a Dial-Up Network (DUN) profile
to pair with a PC or PDA, you will need to allow the other
device to initiate pairing with your phone.
To allow your phone to be paired with another Bluetooth device:
1.
Select Menu > Tools> Bluetooth > Add New >
Wait for request.
2.
Follow the on screen prompts to enter your passkey and
press
174
.
Section 2L: Using Bluetooth® Wireless Technology
.
.
Advertisement
Table of Contents
