Getting Started - Sony KV-SW14M50 Service Manual

x Getting Started
Initial Setup
English
Language:
Confirm End
Select
4
Step 1
1
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tips
• Your TV can receive both TV and FM radio signal from the
appropriate connections through the 8 (antenna input)
terminal (see page 8).
• You can also connect your TV to other optional components
(see page 8).
Step 3
Plug in the power cord, then press ! on the TV to
turn it on.
Note
• The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
Step 4
Set up the TV by following the instructions of the
"Initial Setup" menu (see page 5).
Sony KV-SW14M90 Group O8 (
GB,
CT, CS)_2-638-469-11 (1)