Advertisement
Exhaust Installation
1. Starting on Left Side, place a clamp on expanded end of L/H Muffler As-
sembly. Carefully insert (2) hangers into rubber isolators. DO NOT TIGHT-
EN CLAMP BOLTS (See Figs. 5A & 5B)
2. Repeat Step 1 to install R/S Muffler Assembly to vehicle.
3. Reinstall L/S Muffler Assembly to vehicle using factory Left Side Hanger
Bracket using factory hardware. Tighten nuts to 12 ft. lbs. (See Figs. 6A &
6B)
4. Repeat Step 3 to reinstall factory R/S Muffler Assembly to vehicle.
5. Reconnect left-side and right-side wire harness to factory electronic ac-
tuators.
6. Check your exhaust system for proper clearance under the vehicle and also
for tip centering to valence. (See Fig. 7)
7. Once position has been determined to be correct, tighten the Muffler Assem-
bly inlet clamp bolts; then the Tailpipe Assembly Tip clamp bolts, 32-35 ft.
lbs. (See Fig. 8)
8. Before starting your vehicle, make sure to check all wires, hoses, brake
lines, body parts and tires for safe clearance from the exhaust system.
9. Start vehicle and check for any leaks. If any leaks are found, determine
cause (such as loose or incorrectly positioned clamp) and repair as neces-
sary.
WARNING: Use extreme caution during installation. Torque all fasteners according to manufactur-
er's torque values and tightening sequence. DO NOT use air impact tools to tighten fasteners on
Borla Performance Exhaust Systems. Use of such tools may result in bent flanges or gasket contact
areas leading to exhaust leaks.
NOTE: When you first start your vehicle after the installation of your new Borla Performance
Exhaust System, there may be some smoke and fumes coming from the system. This is a protective
oil based coating used in the manufacturing of mandrel bent performance exhaust tubing. This is
not a problem and will disappear within a very short period of time after the exhaust has reached
normal operating temperatures.
INSTALLATION GUIDE
Chevrolet Camaro (Gen6)
Borla Performance
DOCUMENT PART NUMBER
A-35867 Rev. E
BORLA PERFORMANCE INDUSTRIES
500 Borla Drive
Johnson City TN, 37604-7523
805-986-8600
5A
Left Side
5B
Left Side
Left Side
6A
6B
Left Side
7
8
PAGE
5 of 5
Advertisement
