Advertisement
Quick Links
***** Please compare the parts in the box with the bill of materials provided *****
to assure that you have all the parts necessary for this installation.
These instructions have been written to help you with the installation of your Borla Performance Exhaust System. Please read this document com-
pletely before beginning the installation of your system.
To ensure this part number fits your specific model year, please visit our website for the latest model year listings at
Thank you for purchasing a Borla Performance Exhaust System.
Borla Performance Resonator Option (PN 60661) is designed for the Ford Mustang GT equipped with a 5.0L V8
engine and automatic or manual transmissions.
Borla Performance Cat-Back™ Exhaust Systems (PN's 140742*, 140743*) are designed for the Ford Mustang GT
equipped with a 5.0L V8 engine and automatic or manual transmissions.
*Equipped with Active Valve Performance Exhaust Option
Borla Performance Industries recommends that an exhaust shop or professional after market parts installer, who has all the necessary equipment,
tools and experienced personnel needed for proper installation, should perform the installation of this system. However, if you decide to perform
the installation, we recommend someone should help you. Ensure the installer uses all under car safety precautions including eye protection.
Please take time to read and understand the following...
By installing your Borla Performance Exhaust System, you indicate that you have read this document and you agree with the terms stated below.
It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your Borla Performance
Exhaust System.
Borla Performance Industries assumes no responsibility for damages occurring from misuse, abuse, improper installation, improper operation, lack
of responsible care, or all previously stated reasons resulting from incompatibility with other manufacturer's products and/or systems.
INSTALLATION INSTRUCTIONS
Ford Mustang GT 5.0L
Installation for Ford Mustang GT
PN's 60661, 140742*,
140743*
DOCUMENT PART NUMBER
A-35963 Rev. B
BORLA PERFORMANCE INDUSTRIES
500 Borla Drive
Johnson City TN, 37604-7523
805-986-8600
www.BORLA.com
PAGE
1 of 7
Advertisement
Related Manuals for BORLA 60661
Summary of Contents for BORLA 60661
- Page 1 Please take time to read and understand the following… By installing your Borla Performance Exhaust System, you indicate that you have read this document and you agree with the terms stated below. It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your Borla Performance Exhaust System.
-
Page 2: Shop Supplies
2. 3/8” Drive Extension 3” 3. 15mm Deep Well Socket 4. 13mm Socket 5. Pry Bar SHOP SUPPLIES: 1 Spray Lubricant Borla Performance - Bill of Materials 60661 INSTALLATION INSTRUCTIONS DOCUMENT PART NUMBER PAGE Ford Mustang GT 5.0L A-35963 Rev. B... - Page 3 BORLA PERFORMANCE INDUSTRIES 500 Borla Drive Johnson City TN, 37604-7523 805-986-8600 140742 140743 INSTALLATION INSTRUCTIONS DOCUMENT PART NUMBER PAGE Ford Mustang GT 5.0L A-35963 Rev. B 3 of 7...
- Page 4 BORLA PERFORMANCE INDUSTRIES 500 Borla Drive Johnson City TN, 37604-7523 805-986-8600 140742CF 140743CF INSTALLATION INSTRUCTIONS DOCUMENT PART NUMBER PAGE Ford Mustang GT 5.0L A-35963 Rev. B 4 of 7...
- Page 5 Borla Performance Exhaust System. Note: With a used vehicle, we suggest a penetrating spray lubricant to be applied liberally to all exhaust fasteners and allowing a significant period of time for the chemical to lubri- cate the threads before attempting to disassemble.
- Page 6 NOTE: When you first start your vehicle after the installation of your new Borla Performance Exhaust System, there may be some smoke and fumes coming from the system. This is a protective oil based coat- ing used in the manufacturing of mandrel bent performance exhaust tubing.
- Page 7 NOTE: When you first start your vehicle after the installation of your new Borla Performance Exhaust System, there may be some smoke and fumes coming from the system. This is a protective oil based coat- ing used in the manufacturing of mandrel bent performance exhaust tubing.