Advertisement

DAILY USE

After each workout, wipe the cycle down with tissue paper.
Once a month, we recommend to wipe the side covers and
posts with an oily cloth to protect them from sweat etc.
Only use Vaseline oil. Never use alcohol or chemicals.
If it is necessary to move the cycle, handle it with care and
avoid bumps. Use the handlebars in locked position and
wheel the cycle. DO NOT lift by the saddle or handles.
Front and seat posts are fitted individually to each bike so
DO NOT switch them from one cycle to another.

RUBBER FEET

To ensure that the cycle is in level, always adjust the rubber
after moving the cycle. Every second year the rubber feet
should be replaced as the rubber hardens and becomes
unable to absorb the impact.

INSIDE INSPECTION

Inspect the Kevlar
®
brake pad after the first month and
hereafter every third month. Replace the brake unit before
the Kevlar
brake pad is worn through and reveals the black
®
rubber. At every inspection the cycle should be vacuum
cleaned inside. Also check that the ribs on the Poly-V belt and
pulley are clean. Polish the flywheel edge with 3M Scotch-
Brite
pad to prevent dirt from collecting on the edge.
Tighten the pedals every 2 weeks to prevent them from
getting loose or breaking off. The pedals should always
be screwed on in the direction of the handlebar. Use a
15mm pedal wrench to tighten the pedal. Pedals should be
changed once a year or at least after 1500 hours of cycling.
QUICK MANUAL
BODY BIKE SMART
Download and read full instructions on
www.body-bike.com/marketing/manuals
Edition 1.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMART and is the answer not in the manual?

Questions and answers

Summary of Contents for BODY BIKE SMART

  • Page 1 QUICK MANUAL BODY BIKE SMART Download and read full instructions on www.body-bike.com/marketing/manuals DAILY USE INSIDE INSPECTION After each workout, wipe the cycle down with tissue paper. Inspect the Kevlar ® brake pad after the first month and Once a month, we recommend to wipe the side covers and hereafter every third month.
  • Page 2 STABILIZERS HANDLEBAR PEDALS READ ME READ ME READ ME x 2 M8x20 x 2 M6x10 Left pedal (L) x 2 Ø8 washer x 2 Ø6 dual washer Right pedal (R) Ribs facing up Start mounting Torque wrench Torque wrench by hand Allen 5mm Allen 5mm Tighten to 12Nm...

Table of Contents