Advertisement
1
- How to remove the Load Carriage Motor Assy
1. Make the system in the carriage mechanism
mode, and have it clamped.
2. Release the leads (orange and purple) of Load
A
Carriage Motor Assy from the CD Core Unit and
remove the holder.
3. Remove the Poly Washer, Change Arm, and
Pickup Lock Arm.
4. Remove the two Screws (A) and the Bevel Gear
Bracket (Note that the gears will come off).
5. Remove the two Screws (B) and the Gear
Bracket (remove the CD Core Unit, if necessary),
and remove all the gears.
6. Remove the two Screws (C) and the Load
Carriage Motor Assy.
Caution: When assembling the Load Carriage Motor
B
Assy, move it to the direction shown in the
illustration (1).
When treating the leads of the Load
Carriage Motor Assy, do not make them
loose over the Feed Screw.
Load Carriage Motor
C
D
E
F
26
1
2
Assy
Screw C
CX-3195
2
3
Screw B
Poly Washer
Change Arm
Pickup Lock Arm
3
4
Gear Bracket
Screw A
Bevel Gear Bracket
1
4
Advertisement
