Glendinning Cablemaster User's Installation And Operation Manual page 3

G
ETTING TO
Relay Assembly
(on CM-7 &
CM-8 only)
Tension Rollers
Guide Roller Assembly
All Cablemasters are designed to eliminate the physically demanding task of paying out and coiling up your shore
power cable. Powered extension and retraction is available at the flip of a switch! There are 3 models to choose from:
1) CM-4 Cablemaster — the CM-4 was designed to handle 30 amp shore power cable. The CM-4 usually comes
attached to it's own storage container to make installation as easy as possible. You may also order the CM-4 with TV
/ telephone cable installed instead of 30 amp shore power cable.
2) CM-7 Cablemaster — the CM-7 (the workhorse of the Cablemaster line) was designed to handle 50 amp shore
power cable.
3) CM-8 Cablemaster — the CM-8 is our "heavy duty" version of the CM-7. The CM-8 will handle 100 amp shore
power cable. You definitely don't want to be extending and retracting this heavy cable by hand!
All of these units can be configured to your boat's specifications by utilizing the many accessories which aid in instal-
lation and operation of the Cablemaster.
CM-4
(for 30 amp cable)
(CONTAINER
OPTIONAL)
K
NOW
Motor
3
MODELS TO CHOOSE FROM
(for 50 amp cable)
Y C
OUR ABLEMASTER
In-Limit
Switch
Main Pulley
Out-Limit
Switch
CM-7
Hawse Pipe Clamp
Chrome Hawse Pipe
:
CM-8
(for 100 amp cable)
2