HELLER HDF030 User Manual
HELLER HDF030 User Manual

HELLER HDF030 User Manual

3l stainless steel deep fryer

Advertisement

Quick Links

3L Stainless Steel Deep Fryer
User Manual
Model Number: HDF030
READ AND SAVE THESE INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDF030 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HELLER HDF030

  • Page 1 3L Stainless Steel Deep Fryer User Manual Model Number: HDF030 READ AND SAVE THESE INSTRUCTIONS...
  • Page 2 IMPORTANT Read and follow the instructions in this user manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information.
  • Page 3 • Do not place anything on top of the deep fryer when the lid is closed, when in use and when stored. • The appliance is not intended to be operated by means of an external timer or a separate remote-control system.
  • Page 4 OPERATING INSTRUCTIONS 1. Ensure that the appliance is unplugged and turned off. 2. Remove the lid and frying basket out of the deep fryer, add oil to the bowl. Ensure to add the exact amount to the level mark (3 litres). NOTE: Never exceed the maximum fill level (3 litres).
  • Page 5 • The removable enamel bowl is easy to clean. Wipe up any excess oil with absorbent paper towel then wash the bowl in warm soapy water and dry with a clean cloth. Do not use a scourer or harsh detergent on the bowl as it will damage the surface.
  • Page 6 OVERHEAT PROTECTION If you should accidentally switch on your deep fryer when there is no/not enough oil, the overheat protection will automatically switch the appliance off. Only after the unit has been left to cool down completely, should the ‘RESTART’ button on the rear of the control element be pressed.

Table of Contents