Advertisement
Forword
Dear customer!
The PROXXON Micro screwdriver MIS 1 is a
handy, but however, a powerful tool for sensitive
screwing.
This manual comprises:
• safety regulations,
• operating and maintenance instructions,
• spare parts list.
Please note!
Using this manual will
• help you to understand the machine
• avoid malfunctions caused by faulty operation
• increase the lifetime of the machine.
Always keep this manual close at hand.
Do not operate the machine unless you are fully
familiar with it. Follow the instructions.
PROXXON will not assume liability lor safe
functioning
• if the machine is used in a way that does not
comply with the usual modes of operation,
• if it is used for purposes other than those
mentioned in this manual,
• if the safety regulations are not observed.
No warranty claims can be lodged for damage
resulting from
• operating errors,
• insuffi cient maintenance.
Please observe the safety regulations for your
own safety.
Use only genuine PROXXON spare parts.
We reserve the right for technical modifi cations
without prior notifi cation.
We wish you much success with your new
machine.
Warning!
Read all safety warnings and inst-
ructions. Failure to follow all safety
warnings and instructions listed below
may result in electric shock, fi re and/or
serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUC-
TIONS FOR THE FUTURE !
Legend
Fig.1
1. Tool insert
2. Toothed rim chuck
3. Torque adjustment ring
4. Tumbler switch to cw and ccw rotation
5. Machine hanger
6. Power cable
7. Drill chuck key
Description of the machine
The PROXXON Micro screwdriver MIS 1 is an
ideal tool for sensitive screwing for watch makers,
opticians, jewellers, precision mechanics and
model makers.
The machine is equipped with:
• Toothed rim drill chuck with a clamping diame-
ter of up to 6 mm, also for 1/4" normal bits.
• Three-step planetary gear tor correct screwing
speed of 150 rpm.
• Conveniently positioned tumbler switch for
clockwise and counter-clockwise rotation.
• Sensitive friction clutch. Adjustable in fi ve
steps from 0.25 to 1.0 Nm. Step 6 = clutch
OFF up to a torque of 2.0 Nm.
Accessories included
You will find the following screwdriver bits in your set:
• screwdriver bits for slot-head screws:
0.3 x 1.5 mm, 0.35 x 2 mm, 0.4 x 2.5 mm
• TX screwdriver bits, sizes T6, T8 and T10
• Phillips screwdriver bits, sizes 0 and 1
• Allen key bits, sizes 1.5, 2.0 and 2.5 mm
• Hexagon socket inserts:
3.0, 3.5, 4.0, 4.5 and 5.0 mm
Suitable power supplies
To supply the machine, we recommend only
Proxxon power supplies (including the adjustable
versions, NG2/E or NG5/E). In all cases, the
power supply should have an output capacity of
1 A at 12 V.
Technical data
Voltage:
Power consumption:
Speed:
12 to 18 V
40 Watt
250/rmp
Advertisement
