Samsung SNC-B5368P User Manual page 49

- Multicast port : UDP Port used to transfer video signal with the UDP Multicast
protocols. The default is 60005(UDP).
- TTL* : Set the TTL for the VNP packet.
The default is 63, and if you want to change the address, specify it ranging from
0 to 255.
RTP confi guration : You can set the RTP protocol.
- RTSP port : You can set the RTSP port.
- Streaming port : Used to transfer video signal with the RTP protocols.
The default range is between 61000 and 61999.
- Multicast address : IP address used to transfer video signal with the RTP
protocols.
- Multicast port : Used to transfer video signal with the RTP-protocol multicasting.
- TTL* : You can set the TTL for the RTP packet.
2. When done, click [Apply].
Your settings are saved and the system restarts.
The currently opened web browser will be closed.

M
If the IP router has more than one camera connected, you should confi gure IP and port settings
differently with each other.
To set the user account
1. Click <Basic> - <User>.
The User setup window appears.
Login authentication : You can set to
authenticate the login by the user.
- If you select <Enable>, the user
should have gone through the
login authentication; if selecting
<Disable>, every user can access
the system without the login authentication, having the ordinary user permissions.
- When done, click [Apply].
User login ID/password list : Displays a list of accessible users ID, passwords, and
ratings.
- You can add up to 10 users.
- The admin ID is "root".
- The password for the admin ID can be changed, but not added or deleted.
2. When done, click [Apply].
Your settings will be saved.
The currently opened web browser will be closed.
English _49