Samsung SNC-B5368P User Manual page 48

setup screen
To configure the IP settings
1. Select <Basic> - <IP>.
The IP setup window appears.
IP confi guration : Set the IP and port
settings for the camera.
- IP type : Select one from <Static
IP>, <Dynamic IP>, and <PPPoE
IP>.

If you select <PPPoE IP>, you can
provide the optional ADSL IP and
password. However, the multicast items
(multicast address, port, TTL) for VNP
and RTP will disappear.
- MAC address : Displays the
Ethernet MAC address.
This is used for creating a DDNS
address.
- IP address : Displays the current IP
address.
- Subnet mask : Displays the
<Subnet mask> for the set IP.
- Gateway : Displays the <Gateway> for the set IP.
- DNS server : Displays the DNS(Domain Name Service) server address.
- HTTP webserver port : HTTP port used to access the camera via the web
browser. The default is 80(TCP).
- Upload port (TCP) : Used to upgrade the software fi rmware, defaulted to 60004(TCP).
IPv6 confi guration : Obtains the IPv6 address to access the IPv6 network.
VNP confi guration : Set a port used to transfer video signals with the Samsung
protocols.
- Device port (TCP) : Used to control the video signal transfer, defaulted to 60001(TCP).
- TCP streaming port : Video signal transfer port using TCP protocols, defaulted
to 60002(TCP).
- UDP streaming port : UDP Port used to transfer video signal with the UDP
Unicast protocols. The default is 60003(UDP).
- Multicast address : IP address used to transfer video signal with the UDP
Multicast protocols.
The default is 225.128.1.128, and if you want to change the address, specify it
ranging from 224.0.0.0 to 239.255.255.255.
48_ setup screen